Brent Pollard <[EMAIL PROTECTED]> writes: > >Will we are on the subject, I have a '99 DV SE 400 slotloader and have >decided to put in a new HD, probably a Western Digital 120 7200rpm 8mb. Will >this be a fairly straight forward DIY project? All I have done up to this >point is install ram. What problems are likley to occur?
It's not terribly difficult, but you'll want to find some good instructions and work carefully. There are a lot of different-sized screws to remove, so a bit of organization will go a long way. A phillips screwdriver with a magnetized tip would be very useful (I didn't have one when I upgraded my iMac and it made the job a fair bit harder than it had to be). :/ -Jeff [EMAIL PROTECTED] -- "You can't brew a premium lager with a kool-aid mentality." --Harold Green in _The_Red_Green_Show_ -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
