At 9:06 PM -0800 12/3/04, Dennis B. Swaney wrote:
At 11:46 PM -0500 12/3/04, Mary wrote:
At 7:52 PM -0800 12/3/04, Dennis B. Swaney wrote:

I just bought a Maxtor 200GB drive ($99) and put it into a new MacAlly 100AF Firewire case. However, I can't get it to mount on the desktop of my G4 iMac nor does it show up in Disk Utility. Have I wasted my money? I thought that I could partition it into two 100GB partitions and use one as a back-up for my G4 iMac and the other for my G4 Powerbook.

System Profiler sees it, or...?

No.

Know about the firmware update?
http://www.macally.com/techsupport/drivers.html

Mary

Looks like that is the problem so I'm screwed. I have two Macs running 10.3.6 and two running 9.1. I can only update the firmware with a Mac running 10.1.x through 10.3.5.

So, boot up from an OS X CD (other than 10.3.6), format the firewire drive if needed, install the OS with a minimum configuration, load the firmware updater on the disk, run it and you are set.


If it won't run from the drive, install the 200Gb drive into the computer, install a pre-OSX.3.6 version on it and so on.
--
Clark Martin
Redwood City, CA, USA
Macintosh / Internet Consulting


"I'm a designated driver on the Information Super Highway"

--
The iMac List is sponsored by <http://lowendmac.com/> and...

Small Dog Electronics    http://www.smalldog.com  | Refurbished Drives |
- Epson Stylus Color 580 Printers - new at $69    |  & CDRWs on Sale!  |

     Support Low End Mac <http://lowendmac.com/lists/support.html>

iMac List info:         <http://lowendmac.com/imac/list.shtml>
 --> AOL users, remove "mailto:";
Send list messages to:  <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:  <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/>


---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com
---------------------------------------------------------------




Reply via email to