Hi Rich, If you need an firmware update, go to www.sun.com, and you can get the firmware. If you go to the product page, for example Sun Blade 100: http://www.sun.com/products-n-solutions/hardware/docs/Workstation_Products/Workstations/Sun_Blade_Workstations/Sun_Blade_100/index.html
You should be able to get the firmware you need. Let me know if this works for you. thanks, sarah **** Rich Reynolds wrote: > Hi all - > > I just tried to do this on a friend's SunBlade 150 same error. He > said that he needed a firmware upgrade for the CD/DVD..... > > HTH, > > rich > > Sarah Jelinek wrote: >> Glenn Lagasse wrote: >>> Hi Kyle, >>> >>> Kyle J. McDonald wrote: >>>> WEll, I guess the moderator is really busy, because more replies >>>> I've emailed have yet to show up. I guess I 'll stick with the web >>>> interface from now on. >>> >>> Well, this list isn't moderated (as far as I know). Perhaps >>> something's out to lunch in the mail delivery path. >>> >>>> Something is definitely wrong here. But I'll be damned if I can >>>> figure it out. >>>> >>>> I get the same results no matter what I try. >>>> >>>> I've tried the SB100 IDE CDROM in the U10, The U10 IDE CDROM in the >>>> SB100. >>>> I've tried a PC IDE CDROM in both. >>>> I've tried them all as master and as slave, and on both IDE0 and >>>> IDE1. I've tried it with and without the IDE Hard Drive plugged in. >>>> >>>> I've tried them with NV_46 CD's I've burned (from most combinatiosn >>>> of 2 different burners and 3 different burning programs.) and with >>>> a set of original S8 00/06 CD's I finally managed to track down. >>>> >>>> I always get the same result: >>>> >>>> Can't read disk label >>>> Can't open disk label package >>>> >>>> Can't open boot device >>>> >>>> 'probe-ide' always shows them as there. The CDROM drive light >>>> lights up when the boot attempt is made. >>>> >>>> I even triesd to boot from the Prom Update CD in the S8 CD book. >>>> Same results. >>>> >>>> I guess I'm back to thinking it's a HW problem, but I"m not sure >>>> where to start, and Something in me keeps saying: >>>> >>>> "But how coudl both of those computers from different people in >>>> different parts of the company, and different design's both have >>>> the same problem?" >>>> >>>> Can anyone tell me where on the CD the OBP looks to find the label? >>>> >>>> UUUGGGHHH! This makes no sense!!!! >>> >>> If you see the same issue with other media (in particular original >>> S8 media like you mentioned) then I'd bet it's a hardware issue. >>> It's certainly not an issue with your burned media. >>> >>> Out of curiousity, does the cdrom light come on when you boot >>> cdrom? My old support memories are ringing about something like the >>> cdrom alias in the obp is possibly wrong? >>> >>> maybe try something like running devalias cdrom at the ok prompt and >>> see where it points to and if that is correct. probe-ide would >>> probably be useful info as well. >> Actually, are you running 'boot cdrom' as the command or just >> allowing this to try to boot on power on? It seems as if the media it >> is trying to read as the boot device is not the cdrom as you are >> thinking. It doesn't say, it just says can't read label, can't open >> boot device. I suspect it isn't trying to boot using the cd. >> >> sarah >> **** >>> >>> Cheers, >>> >>> Glenn >>> _______________________________________________ >>> install-discuss mailing list >>> install-discuss at opensolaris.org >>> http://opensolaris.org/mailman/listinfo/install-discuss >> >> _______________________________________________ >> install-discuss mailing list >> install-discuss at opensolaris.org >> http://opensolaris.org/mailman/listinfo/install-discuss >
