Sorry... I meant to address this to Kyle. long day....
sarah ***** Sarah Jelinek wrote: > Hi Rich, > > If you need an firmware update, go to www.sun.com, and you can get the > firmware. If you go to the product page, for example Sun Blade 100: > http://www.sun.com/products-n-solutions/hardware/docs/Workstation_Products/Workstations/Sun_Blade_Workstations/Sun_Blade_100/index.html > > > > You should be able to get the firmware you need. Let me know if this > works for you. > > thanks, > sarah > **** > Rich Reynolds wrote: >> Hi all - >> >> I just tried to do this on a friend's SunBlade 150 same error. He >> said that he needed a firmware upgrade for the CD/DVD..... >> >> HTH, >> >> rich >> >> Sarah Jelinek wrote: >>> Glenn Lagasse wrote: >>>> Hi Kyle, >>>> >>>> Kyle J. McDonald wrote: >>>>> WEll, I guess the moderator is really busy, because more replies >>>>> I've emailed have yet to show up. I guess I 'll stick with the web >>>>> interface from now on. >>>> >>>> Well, this list isn't moderated (as far as I know). Perhaps >>>> something's out to lunch in the mail delivery path. >>>> >>>>> Something is definitely wrong here. But I'll be damned if I can >>>>> figure it out. >>>>> >>>>> I get the same results no matter what I try. >>>>> >>>>> I've tried the SB100 IDE CDROM in the U10, The U10 IDE CDROM in >>>>> the SB100. >>>>> I've tried a PC IDE CDROM in both. >>>>> I've tried them all as master and as slave, and on both IDE0 and >>>>> IDE1. I've tried it with and without the IDE Hard Drive plugged in. >>>>> >>>>> I've tried them with NV_46 CD's I've burned (from most >>>>> combinatiosn of 2 different burners and 3 different burning >>>>> programs.) and with a set of original S8 00/06 CD's I finally >>>>> managed to track down. >>>>> >>>>> I always get the same result: >>>>> >>>>> Can't read disk label >>>>> Can't open disk label package >>>>> >>>>> Can't open boot device >>>>> >>>>> 'probe-ide' always shows them as there. The CDROM drive light >>>>> lights up when the boot attempt is made. >>>>> >>>>> I even triesd to boot from the Prom Update CD in the S8 CD book. >>>>> Same results. >>>>> >>>>> I guess I'm back to thinking it's a HW problem, but I"m not sure >>>>> where to start, and Something in me keeps saying: >>>>> >>>>> "But how coudl both of those computers from different people in >>>>> different parts of the company, and different design's both have >>>>> the same problem?" >>>>> >>>>> Can anyone tell me where on the CD the OBP looks to find the label? >>>>> >>>>> UUUGGGHHH! This makes no sense!!!! >>>> >>>> If you see the same issue with other media (in particular original >>>> S8 media like you mentioned) then I'd bet it's a hardware issue. >>>> It's certainly not an issue with your burned media. >>>> >>>> Out of curiousity, does the cdrom light come on when you boot >>>> cdrom? My old support memories are ringing about something like >>>> the cdrom alias in the obp is possibly wrong? >>>> >>>> maybe try something like running devalias cdrom at the ok prompt >>>> and see where it points to and if that is correct. probe-ide would >>>> probably be useful info as well. >>> Actually, are you running 'boot cdrom' as the command or just >>> allowing this to try to boot on power on? It seems as if the media >>> it is trying to read as the boot device is not the cdrom as you are >>> thinking. It doesn't say, it just says can't read label, can't open >>> boot device. I suspect it isn't trying to boot using the cd. >>> >>> sarah >>> **** >>>> >>>> Cheers, >>>> >>>> Glenn >>>> _______________________________________________ >>>> install-discuss mailing list >>>> install-discuss at opensolaris.org >>>> http://opensolaris.org/mailman/listinfo/install-discuss >>> >>> _______________________________________________ >>> install-discuss mailing list >>> install-discuss at opensolaris.org >>> http://opensolaris.org/mailman/listinfo/install-discuss >> > > _______________________________________________ > install-discuss mailing list > install-discuss at opensolaris.org > http://opensolaris.org/mailman/listinfo/install-discuss
