On Fri, Sep 25, 2015 at 02:23:34PM +0100, Arun Siluvery wrote:
> Signed-off-by: Arun Siluvery <[email protected]>
> ---
>  drivers/gpu/drm/i915/intel_ringbuffer.c | 25 ++++++++++---------------
>  1 file changed, 10 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c 
> b/drivers/gpu/drm/i915/intel_ringbuffer.c
> index c681c66..fdff606 100644
> --- a/drivers/gpu/drm/i915/intel_ringbuffer.c
> +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
> @@ -819,6 +819,16 @@ static int gen8_init_workarounds(struct intel_engine_cs 
> *ring)
>       /* Wa4x4STCOptimizationDisable:bdw,chv */
>       WA_SET_BIT_MASKED(CACHE_MODE_1, GEN8_4x4_STC_OPTIMIZATION_DISABLE);
>  
> +     /* From the Haswell PRM, Command Reference: Registers, CACHE_MODE_0:
> +      * "The Hierarchical Z RAW Stall Optimization allows non-overlapping
> +      *  polygons in the same 8x4 pixel/sample area to be processed without
> +      *  stalling waiting for the earlier ones to write to Hierarchical Z
> +      *  buffer."
> +      *
> +      * This optimization is off by default for BDW and CHV; turn it on.
> +      */
> +     WA_CLR_BIT_MASKED(CACHE_MODE_0_GEN7, HIZ_RAW_STALL_OPT_DISABLE);
> +

Ok, so apart from the threadstall thing the rest looks reasonable.
One request though, can you put w/as into some decent order? I
suggest ordering based on the register, so eg.

instpm
mi_mode
row chicken
half slice chicken
common slice chicken
hdc chicken
cache_mode_0
cache_mode_1
gt_mode

I think that should match reasonably well what we have in most places.
Or you can come up with something better if you wish, as long as the
same/similar registers are grouped decently.

>       /*
>        * BSpec recommends 8x4 when MSAA is used,
>        * however in practice 16x4 seems fastest.
> @@ -865,16 +875,6 @@ static int bdw_init_workarounds(struct intel_engine_cs 
> *ring)
>                         /* WaDisableFenceDestinationToSLM:bdw (pre-prod) */
>                         (IS_BDW_GT3(dev) ? HDC_FENCE_DEST_SLM_DISABLE : 0));
>  
> -     /* From the Haswell PRM, Command Reference: Registers, CACHE_MODE_0:
> -      * "The Hierarchical Z RAW Stall Optimization allows non-overlapping
> -      *  polygons in the same 8x4 pixel/sample area to be processed without
> -      *  stalling waiting for the earlier ones to write to Hierarchical Z
> -      *  buffer."
> -      *
> -      * This optimization is off by default for Broadwell; turn it on.
> -      */
> -     WA_CLR_BIT_MASKED(CACHE_MODE_0_GEN7, HIZ_RAW_STALL_OPT_DISABLE);
> -
>       return 0;
>  }
>  
> @@ -898,11 +898,6 @@ static int chv_init_workarounds(struct intel_engine_cs 
> *ring)
>                         HDC_FORCE_NON_COHERENT |
>                         HDC_DONOT_FETCH_MEM_WHEN_MASKED);
>  
> -     /* According to the CACHE_MODE_0 default value documentation, some
> -      * CHV platforms disable this optimization by default.  Turn it on.
> -      */
> -     WA_CLR_BIT_MASKED(CACHE_MODE_0_GEN7, HIZ_RAW_STALL_OPT_DISABLE);
> -
>       /* Improve HiZ throughput on CHV. */
>       WA_SET_BIT_MASKED(HIZ_CHICKEN, CHV_HZ_8X8_MODE_IN_1X);
>  
> -- 
> 1.9.1
> 
> _______________________________________________
> Intel-gfx mailing list
> [email protected]
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Reply via email to