So I've installed the server on a internal Imail Server. For the time being I am using IM server for authentication. A found a couple of issues that I've not been able to find a solution to in the documents.
1) When I login to the IM server from my client on our internal network it authenticates fine but is shows my status as a Gray smile face and ? mark. 2) I opened up 5177 on our firewall and tried to connect from outside out network and found that it was trying to connect to an internal ip address. Not sure why it was trying to do that? Greg Foulks, MCP NewFound Technologies, Inc. http://www.nfti.com Email: [EMAIL PROTECTED] Voice: 614.318.5036 Fax: 614.318.5005 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Robert Stull Sent: Wednesday, February 05, 2003 12:58 PM To: [EMAIL PROTECTED] Subject: Re: [IpswitchIM_Forum] Clients on private network Server on Internet network ---------- Original Message ---------------------------------- From: "Rick Leske" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Wed, 5 Feb 2003 11:49:20 -0600 >I'm new at the IM as well so excuse my lack of insight into the IM. I have >read a thread where there are actually two ports that need to be opened ie: >5177 & 5178. I know the help file just mentions 5177 but maybe the 5178 is >a spur port needed to maintain noop checks, etc. So if you have any >routers, client side software firewalls, server side ACL's etc. you'll need >to ensure that these ports are open. I hope IPSwitch has added safeguards >to these ports, ie: auto deny possible hack attacks, buffer over run >exploits, etc.. > >----- Original Message ----- >From: "Mike Wiegers" <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Wednesday, February 05, 2003 11:34 AM - SATCOM >Subject: [IpswitchIM_Forum] Clients on private network Server on Internet >network > >> Installed the demo on a valid internet ip and installed the clients on a >> private ip network segment. The clients can attach to the server but >> will be disconnected from the server after a length of time. Also the >> clients show the status of each other in "unknown state" and cannot send >> instant messages back and forth. You do get the messages when you log >> off and back onto the server. Can this setup exist without any changes >> to the private network? If not what changes need to take place? >> We tested for those things on the ports Rick, but I'm not saying that the script kiddies won't find something we didn't. If the client is not seeing the server at all, its probably a port issue. If the client connects and then everything is unknown, its probably a NAT issue. Bob -- Robert S. Stull Messaging Products Manager Ipswitch, Inc. 706.855.5314 x204 -- Anyone can dabble, but once you've made that commitment, your blood has that particular thing in it, and it's very hard for people to stop you.--Bill Cosby ________________________________________________________________ Sent via the KillerWebMail system at alpha.ipswitch.com To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/IpswitchIM_Forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/IpswitchIM_Forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/Instant_Messenger/index.asp
