Here is the dmesg output when I try "# mplayer /dev/video0". ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.4.1 (tagged release) loading ivtv: Linux version: 2.6.14-1.1656_FC4smp SMP 686 REGPARM 4KSTACKS gcc-4.0 ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt 0000:04:08.0[A] -> GSI 25 (level, low) -> IRQ 225 tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023885 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv0: i2c attach to card #0 ok [client=tveeprom, addr=50] ivtv0: This is the first unit of a PVR500 tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0 TEA5767 detected. ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60] tuner: type set to 62 (Philips TEA5767HN FM Radio) by autodetect type set to 62 (Philips TEA5767HN FM Radio) tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=61] cx25840 1-0044: ivtv driver cx25840 1-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) cx25840 1-0044: loaded v4l-cx25840.fw firmware (13353 bytes) ivtv0: i2c attach to card #0 ok [client=cx25840, addr=44] wm8775 1-001b: ivtv driver wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0) ivtv0: i2c attach to card #0 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43] ivtv0: Detected a TEA5767 radio tuner. Enabling radio support. ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv0: Encoder revision: 0x02040024 ivtv0 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) ivtv0: Create encoder radio stream tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #0 ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 ivtv: ====================== NEXT CARD ====================== ivtv1: Autodetected WinTV PVR 150 card (cx23416 based) ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 26 (level, low) -> IRQ 233 tveeprom: Second (radio) tuner idx 101 tveeprom: ivtv version tveeprom: Hauppauge: model = 23552, rev = D492, serial# = 8023885 tveeprom: tuner = Philips FQ1236A MK4 (idx = 92, type = 57) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio processor = CX25843 (type = 25) tveeprom: decoder processor = CX25843 (type = 1e) ivtv1: i2c attach to card #1 ok [client=tveeprom, addr=50] tuner (ivtv): chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv1: i2c attach to card #1 ok [client=(tuner unset), addr=61] cx25840 2-0044: ivtv driver cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) cx25840 2-0044: loaded v4l-cx25840.fw firmware (13353 bytes) ivtv1: i2c attach to card #1 ok [client=cx25840, addr=44] wm8775 2-001b: ivtv driver wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1) ivtv1: i2c attach to card #1 ok [client=wm8775, addr=1b] tda9885/6/7: chip found @ 0x86 ivtv1: i2c attach to card #1 ok [client=tda9887, addr=43] ivtv1: This is the second unit of a PVR500 ivtv1: Correcting tveeprom data: no radio present on second unit ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) ivtv1: Encoder revision: 0x02040024 ivtv1 warning: Encoder Firmware can be buggy, use version 0x02040011 or 0x02050032. ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total) ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total) ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total) ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total) tuner: type set to 57 (Philips FQ1236A MK4) by ivtv i2c driver #1 ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 ivtv: ==================== END INIT IVTV ====================
Again, this is a dual tuner Hauppage PVR-500 under Linux 2.6, ivtv 0.4.1 from the Fedora MythTV HOWTO RPMs. I get good video but no sound. I cannot unset the mute option for tuner0, but if I change the video source to composite or something besides the tuner, I can unmute that sound. I would like to unmute and use the sound on tuner0 however. Thanks for any help, Chris Thielen > On Jan 13, 2006, at 9:23 PM, [EMAIL PROTECTED] wrote: > >> Hello ivtv-users, >> I have a Pentium 4 box with a Hauppage PVR-500 dual tuner >> card. I >> have ivtv 4.0 installed from RPMs from the Fedora-MythTV FAQ. >> When I cat /dev/video0 > test.mpg and use mplayer to play the >> file, I have no audio. I also have no audio in MythTV. I do not >> have xawtv. >> I know audio works and I have set audio to use tuner0 in >> ivtvctl. >> >> ivtv 4.0 >> Hauppage PVR-500 >> >> What should I try? >> > > We'll need more information, like the ivtv section of dmesg, plus any > options in modprobe.conf. > > You could try the 0.4.1 drivers, but remember to redo the setup of > your card in MythTV afterwards, as the inputs changed ordering. > Also, the firmware files changed location and name in 0.4.1, but the > RPMs from atrpms should handle that for you. > > Keith C > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users > _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
