Quoting Hans Verkuil <[EMAIL PROTECTED]>: > On Tuesday 21 March 2006 19:09, Dave Logan wrote: >> Hans, since you work so hard on the driver (and I know we all >> appreciate it), I'd be more than happy to set up a dual boot >> system if nobody else already has one running, and provide you >> with any info you need. I'll get started on it this evening >> unless somebody else pipes up. It should be easy enough to >> pop another disk in to the windows box the card is currently >> in. > > That would be great. I still have no luck obtaining a datasheet from > Samsung (no one seems to know about it) and the problem reports are too > vague for me to do much about it. Count me in on this. While dual booting my server machine is out of the question, the desktop next to it is. I just need to work on the cabling in the server box to make swapping easy.
I'm 99% positive that support for the Samsung tuner support is complete. My logic? We have two identical tuners on the board. One works perfectly, or at least nearly perfectly. The other doesn't work in certain situations, ones which happen to coincide with the frequency coverage of another component on the board (the FM tuner IC) which is only present for the section of the PVR-500 that is exhibiting major problems. Given that one works perfectly, the tuner is almost surely operating fine. For some reason though, one tuner is getting bad input in certain situations. In short, when the Samsung tuner was added, other changes were made to the board elsewhere that need to be taken into account. Thus I don't think the Samsung data sheet would help the situation at all even if it were obtained. Somewhat off topic but related (see above comments about server cabling) - Does anyone know where I can obtain both a 24-pin to 24-pin EPS12V ATX extension cable AND a 4-pin to 4-pin P4ATX extension cable from the same vendor? mwave.com has the 4-pin extension but not the other cable, and directron has the 24 pin but not the 4. Newegg has neither. Unfortunately both vendors either have minimum order amounts greater than the price of the cable I want from them or exorbitantly high S&H for such a small order. Right now removing the PVR-500 from the server involves unplugging very thick and stiff cables and moving them out of the way, getting those extensions would make the process MUCH easier. _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
