I am unfortunately unable to find a copy of the 2.0.43.24054 driver.
Jon Larson wrote: > > > ------------------------------------------------------------------------ > *From:* John Drescher [mailto:[EMAIL PROTECTED] > *Sent:* Monday, September 11, 2006 10:47 AM > *To:* User discussion about IVTV; [EMAIL PROTECTED] > *Subject:* Re: [ivtv-users] heavy snow/static on PVR-500 using ivtv .70 > driver. > > > > On 9/7/06, *Jon Larson* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > I'm hoping I can get some help troubleshooting my problems with 2 > PVR-500 cards that I have, as I don't really know what else I can do > on my own. > > Problem: When using tuners, all channels are corrupted with a > substantial (up to 50%) static. > > Things I've tried so far: If I plug the same cable into a tv, > the channels come through clear. If I use composite inputs, > everything is clear as well. I've tested in Myth and using > ivtvctl/ivtv-tune--both methods yield the same snowy > results. Initially, I tested both cards in the same box > running mythdora 2.32 (FC4, ivtv-0.7-113). The mythdora system was a > dual Opteron system running the Nforce Pro chipset--both cards > exibited the same distortion. > > Since I already had a backup system working with a PVR-150 and > Knoppmyth R5D1 (2.6.17-chw-8, ivtv 0.7.0), I placed one of the > PVR-500 cards in that system, and put the other one in a Windows XP > system. > > There's a little less snow using the PVR-500 on the Knoppmyth > system, but still to much for decent viewing. The PVR-150 in the > same box works perfectly. The system is an Intel 850 chipset > (1.8ghz P4) with a matrox video card. > > In Windows the card works perfectly when using the 2.0.43.24054 > drivers, but when I install driver version 2043_24103 or > 20.43_24108(beta) from the Hauppauge website, I get the same snowy > reception as in Linux. > > > This sounds like a problem with the firmware. I don't have time to > go into how this is done but you need to use the ivtv source code > to extract the firmware from 2.0.43.24054 and place that firmware > in /lib/firmware. > > John > > Ok, I replaced the v4l-cx2341x-enc.fw file with the HcwFalcn.rom from > the 2.0.43.24054 driver set and that had some improvement--now one of > the tuners on the PVR-500 works, but the other one still has quite a bit > of static? > > Jon > > > > ------------------------------------------------------------------------ > > _______________________________________________ > ivtv-users mailing list > [email protected] > http://ivtvdriver.org/mailman/listinfo/ivtv-users _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
