On May 30, 2007, at 3:48 AM, Hans Verkuil wrote: > Can you mail me the INIT IVTV messages when ivtv is loaded with > newi2c=1? > (And without the higher debug level). > > Thanks, > > Hans
ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.10.2 (tagged release) loading ivtv: Linux version: 2.6.21-gentoo-r2 mod_unload ivtv: In case of problems please include the debug info between ivtv: the START INIT IVTV and END INIT IVTV lines, along with ivtv: any module options, when mailing the ivtv-users mailinglist. ivtv0: Autodetected Hauppauge card (cx23416 based) ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18 ivtv0: Unreasonably low latency timer, setting to 64 (was 32) usbcore: registered new interface driver hiddev input: Microsoft Microsoft IntelliMouse? Explorer as /class/input/input2 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-0000:00:02.0-6 usbcore: registered new interface driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ivtv0: loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 tveeprom 2-0050: Huh, no eeprom present (err=-121)? tveeprom 2-0050: Encountered bad packet header [19]. Corrupt or not a Hauppauge eeprom. ivtv0: Invalid EEPROM ivtv0: Registered device video0 for encoder MPEG (4 MB) ivtv0: Registered device video32 for encoder YUV (2 MB) ivtv0: Registered device vbi0 for encoder VBI (1 MB) ivtv0: Registered device video24 for encoder PCM audio (1 MB) ivtv0: Registered device radio0 for encoder radio ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c addr 0x44 not found for command 0x4008646f! ivtv0: i2c hardware 0x00000020 (wm8775) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0xc008561c! ivtv0: Initialized Hauppauge WinTV PVR-150, card #0 ivtv: ==================== END INIT IVTV ==================== ----- Nathaniel Madura Engineer in Research UMTRI - Biosciences 734-936-1109 [EMAIL PROTECTED] _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
