On Tue, 9 Oct 2007, John Drescher wrote: >> [43357.498418] ivtv3 warning: CX2341X_ENC_MISC took 28 jiffies (250 per HZ) >> [43357.498550] ivtv2 warning: CX2341X_ENC_SET_VBI_LINE took 29 jiffies (250 >> per HZ) >> [43357.770294] ivtv3 warning: CX2341X_ENC_MISC took 68 jiffies (250 per HZ) >> [43357.770439] ivtv2 warning: CX2341X_ENC_SET_VBI_LINE took 68 jiffies (250 >> per HZ)
>> - > Can you post the dmesg IVTV init block? See below. Could me being at 0.10.1 be the problem? When I set this up I went with what the howto (https://help.ubuntu.com/community/Install_IVTV_Feisty) told me so I didn't update it... Thank you! Jason -------- dmesg | grep -i IVTV [ 60.271878] ivtv: ==================== START INIT IVTV ==================== [ 60.271882] ivtv: version 0.10.1 (tagged release) loading [ 60.271884] ivtv: Linux version: 2.6.20-16-generic SMP mod_unload [ 60.271886] ivtv: In case of problems please include the debug info between [ 60.271887] ivtv: the START INIT IVTV and END INIT IVTV lines, along with [ 60.271889] ivtv: any module options, when mailing the ivtv-users mailinglist. [ 60.271989] ivtv0: Autodetected Hauppauge card (cx23416 based) [ 60.932948] ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 61.149890] ivtv0: Encoder revision: 0x02050032 [ 61.149894] ivtv0: Recommended firmware version is 0x02060039. [ 61.210934] ivtv0: Autodetected WinTV PVR 500 (unit #1) [ 61.227789] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) [ 61.232691] tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) [ 61.233032] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) [ 61.277756] cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #0) [ 66.219481] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) [ 66.285919] ivtv0: Registered device video0 for encoder MPEG (4 MB) [ 66.286229] ivtv0: Registered device video32 for encoder YUV (2 MB) [ 66.286550] ivtv0: Registered device vbi0 for encoder VBI (1 MB) [ 66.286744] ivtv0: Registered device video24 for encoder PCM audio (1 MB) [ 66.287069] ivtv0: Registered device radio0 for encoder radio [ 66.679008] ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 [ 66.679172] ivtv: ====================== NEXT CARD ====================== [ 66.679176] ivtv1: Autodetected Hauppauge card (cx23416 based) [ 67.312658] ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 67.527664] ivtv1: Encoder revision: 0x02050032 [ 67.527667] ivtv1: Recommended firmware version is 0x02060039. [ 67.534304] tuner 3-0043: chip found @ 0x86 (ivtv i2c driver #1) [ 67.538763] tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #1) [ 67.560692] cx25840 3-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1) [ 72.483550] wm8775 3-001b: chip found @ 0x36 (ivtv i2c driver #1) [ 72.555275] ivtv1: Correcting tveeprom data: no radio present on second unit [ 72.555277] ivtv1: Autodetected WinTV PVR 500 (unit #2) [ 72.624575] ivtv1: Registered device video1 for encoder MPEG (4 MB) [ 72.624882] ivtv1: Registered device video33 for encoder YUV (2 MB) [ 72.625205] ivtv1: Registered device vbi1 for encoder VBI (1 MB) [ 72.625415] ivtv1: Registered device video25 for encoder PCM audio (1 MB) [ 73.012820] ivtv1: Initialized WinTV PVR 500 (unit #2), card #1 [ 73.012894] ivtv: ====================== NEXT CARD ====================== [ 73.012897] ivtv2: Autodetected Hauppauge card (cx23416 based) [ 73.646339] ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 73.861480] ivtv2: Encoder revision: 0x02050032 [ 73.861482] ivtv2: Recommended firmware version is 0x02060039. [ 73.868134] tuner 4-0043: chip found @ 0x86 (ivtv i2c driver #2) [ 73.873073] tuner 4-0060: chip found @ 0xc0 (ivtv i2c driver #2) [ 73.873530] tuner 4-0061: chip found @ 0xc2 (ivtv i2c driver #2) [ 73.895523] cx25840 4-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #2) [ 78.814966] wm8775 4-001b: chip found @ 0x36 (ivtv i2c driver #2) [ 78.888596] ivtv2: Autodetected WinTV PVR 500 (unit #1) [ 78.957264] ivtv2: Registered device video2 for encoder MPEG (4 MB) [ 78.957578] ivtv2: Registered device video34 for encoder YUV (2 MB) [ 78.957910] ivtv2: Registered device vbi2 for encoder VBI (1 MB) [ 78.958116] ivtv2: Registered device video26 for encoder PCM audio (1 MB) [ 78.958454] ivtv2: Registered device radio2 for encoder radio [ 79.350633] ivtv2: Initialized WinTV PVR 500 (unit #1), card #2 [ 79.350708] ivtv: ====================== NEXT CARD ====================== [ 79.350711] ivtv3: Autodetected Hauppauge card (cx23416 based) [ 79.984055] ivtv3: loaded v4l-cx2341x-enc.fw firmware (262144 bytes) [ 80.199476] ivtv3: Encoder revision: 0x02050032 [ 80.199479] ivtv3: Recommended firmware version is 0x02060039. [ 80.206150] tuner 5-0043: chip found @ 0x86 (ivtv i2c driver #3) [ 80.210619] tuner 5-0061: chip found @ 0xc2 (ivtv i2c driver #3) [ 80.232563] cx25840 5-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #3) [ 85.155473] wm8775 5-001b: chip found @ 0x36 (ivtv i2c driver #3) [ 85.227228] ivtv3: Correcting tveeprom data: no radio present on second unit [ 85.227230] ivtv3: Autodetected WinTV PVR 500 (unit #2) [ 85.296756] ivtv3: Registered device video3 for encoder MPEG (4 MB) [ 85.297065] ivtv3: Registered device video35 for encoder YUV (2 MB) [ 85.297401] ivtv3: Registered device vbi3 for encoder VBI (1 MB) [ 85.297613] ivtv3: Registered device video27 for encoder PCM audio (1 MB) [ 85.684448] ivtv3: Initialized WinTV PVR 500 (unit #2), card #3 [ 85.684464] ivtv: ==================== END INIT IVTV ==================== ----------------------- _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
