> On 10/16/07, Jason Portwood <[EMAIL PROTECTED]> wrote:
>> I'm wondering though if my firmware is OK ? I kept seeing the ivtv
>> dmesg
>> report negative bytes in it's output and I wondered about that. Is that
>> a
>> problem?
>
> This is indeed weird :S Can you install the firmware from the below
> link and see if this changes this.
It's a known bug in the fw size reporting in 2.6.22: it's only the message
that's wrong, not the actual fw load.
Regards,
Hans
>
> http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz
>
> Greets
> Sander
>
>> [ 57.223061] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload )
>> loading
>> [ 57.223497] ivtv0: Autodetected Hauppauge card (cx23416 based)
>> [ 57.939220] ivtv0: loaded v4l-cx2341x-enc.fw firmware
>> (-139637081587200 bytes)
>> [ 58.156075] ivtv0: Encoder revision: 0x02060039
>> [ 58.211813] ivtv0: Autodetected WinTV PVR 500 (unit #1)
>> [ 58.236181] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0)
>> [ 58.239852] tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0)
>> [ 58.240096] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0)
>> [ 58.271527] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver
>> #0)
>> [ 61.587035] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0)
>> [ 61.950302] ivtv0: Registered device video0 for encoder MPEG (4 MB)
>> [ 61.950573] ivtv0: Registered device video32 for encoder YUV (2 MB)
>> [ 61.950875] ivtv0: Registered device vbi0 for encoder VBI (1 MB)
>> [ 61.951064] ivtv0: Registered device video24 for encoder PCM audio (1
>> MB)
>> [ 61.951344] ivtv0: Registered device radio0 for encoder radio
>> [ 61.974630] ivtv0: Initialized WinTV PVR 500 (unit #1), card #0
>
> _______________________________________________
> ivtv-users mailing list
> [email protected]
> http://ivtvdriver.org/mailman/listinfo/ivtv-users
>
_______________________________________________
ivtv-users mailing list
[email protected]
http://ivtvdriver.org/mailman/listinfo/ivtv-users
