On 10/16/07, Jason Portwood <[EMAIL PROTECTED]> wrote: > I'm wondering though if my firmware is OK ? I kept seeing the ivtv dmesg > report negative bytes in it's output and I wondered about that. Is that a > problem?
This is indeed weird :S Can you install the firmware from the below link and see if this changes this. http://dl.ivtvdriver.org/ivtv/firmware/firmware.tar.gz Greets Sander > [ 57.223061] ivtv: version 1.0.0 (2.6.22-14-generic SMP mod_unload ) > loading > [ 57.223497] ivtv0: Autodetected Hauppauge card (cx23416 based) > [ 57.939220] ivtv0: loaded v4l-cx2341x-enc.fw firmware (-139637081587200 > bytes) > [ 58.156075] ivtv0: Encoder revision: 0x02060039 > [ 58.211813] ivtv0: Autodetected WinTV PVR 500 (unit #1) > [ 58.236181] tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #0) > [ 58.239852] tuner 2-0060: chip found @ 0xc0 (ivtv i2c driver #0) > [ 58.240096] tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #0) > [ 58.271527] cx25840 2-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0) > [ 61.587035] wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #0) > [ 61.950302] ivtv0: Registered device video0 for encoder MPEG (4 MB) > [ 61.950573] ivtv0: Registered device video32 for encoder YUV (2 MB) > [ 61.950875] ivtv0: Registered device vbi0 for encoder VBI (1 MB) > [ 61.951064] ivtv0: Registered device video24 for encoder PCM audio (1 MB) > [ 61.951344] ivtv0: Registered device radio0 for encoder radio > [ 61.974630] ivtv0: Initialized WinTV PVR 500 (unit #1), card #0 _______________________________________________ ivtv-users mailing list [email protected] http://ivtvdriver.org/mailman/listinfo/ivtv-users
