Hi Rob, Some more Microchip logic ;)
About halve of T2CON-T2OUTPS3 is defined as T2OUTPS3, while the other halve is defined as using TOUTPS3 (same for other OUTPS registers) The majority of T4CON-T4OUTPS3 is defined as, while the following devices are using TOUTPS3 18F6527 T4CON - TOUTPS3 18F6622 T4CON - TOUTPS3 18F6627 T4CON - TOUTPS3 18F6628 T4CON - TOUTPS3 18F6722 T4CON - TOUTPS3 18F6723 T4CON - TOUTPS3 18F8527 T4CON - TOUTPS3 18F8622 T4CON - TOUTPS3 18F8627 T4CON - TOUTPS3 18F8628 T4CON - TOUTPS3 18F8722 T4CON - TOUTPS3 18F8723 T4CON - TOUTPS3 Any thoughts on this? Regards Albert ----- Original Message ----- From: "Rob Hamerling" <[email protected]> To: <[email protected]> Sent: Sunday, August 02, 2009 2:36 PM Subject: [jallib] Re: Timer Library? > > > Hi Albert, > > a.faber wrote: > >> But why is the T2CON reg still defined? Isn't better to remove the T2CON >> reg >> definition afterall if there is not Timer2 present? > > Don't ask me! Ask Microchip (or read the datasheet). > I just 'copy' what is in the MPLAB .dev files (and make some > corrections) without asking why ;-) > > Of course I could remove Timer2 registers from the device files of these > PICs, but is that the right thing to do? Timer2 is present, but > according to the datasheet not supposed to be touched, but also not > absolutely forbidden to be touched! > > Regards, Rob. > > > -- > Rob Hamerling, Vianen, NL (http://www.robh.nl/) > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jallib?hl=en -~----------~----~----~----~------~----~------~--~---
