Hi Seb, On Feb 7, 5:26 pm, Sebastien Lelong <[email protected]> wrote: > Hi Vasi, > > I think I prefer keeping all socket pins, it'll be more solid, and will > require less work to adapt. I don't think traces between Xbee scoket holes > should be a problem, manufacturer should handle this (eagle checks and > reports everything is fine, running seeed rules).
I thought at 44pin TQFP package (I'm playing with that now). > > Another point that come to me: the board is 5cm width, and is supposed to be > breadboardable. But isn't 5cm width a little too... big for a breadboard ?? > Yes, if you limit yourself at one, long piece of breadboard - I'm thinking at two independent boards :) (at least). Also, perfboards with female connectors can be used as testing boards for your final projects. > Cheers, > Seb > > 2011/2/7 funlw65(Vasi) <[email protected]> > > > Hi Seb, > > > If you use only 4 pins from the XXBEE, then is good to edit the > > footprint and keep only those pins, alog with other 2-3 as board > > support (you still have the female socket on the board but with other > > pins cut) and remove the others,, making room for traces and maybe > > 1206 size SMDs. > > > Vasi > > > On Feb 7, 2:47 pm, Sebastien Lelong <[email protected]> > > wrote: > > > 2011/2/6 vasile surducan <[email protected]> > > > > > On Sat, Feb 5, 2011 at 10:30 AM, Sebastien Lelong < > > > > [email protected]> wrote: > > > > >> So, I understand you're using 2 zener diodes 20V/1A for polarity > > > >> protection, is that right ? > > > > > you still don't know (after Oliver's message) which is difference > > between a > > > > zener symbol and a schottky simbol and still trying to design board for > > > > selling, capitalist economy it's amazing ...fortunately the buyers will > > > > don't know either those un-interesting things... > > > > Not that I like nitpicking but... > > > > Shottky diode symbol: > > > > [image: 250px-Schottky_diode_symbol.svg.png] > > > > Zener diode symbol, more than one available. Currently used (I guess to > > > avoid confusion with Schottky's): > > > > [image: vermeil_IEC_Zener_Diode_Symbol.png] > > > > Previously (still widely) used (but looks like Shottky's, right ?). > > > > [image: 140px-Zener_diode_symbol.svg.png] > > > > To my defense, this *could* explain why I got confused (but there are > > other > > > reasons, I'm sure), your diodes really look like "Schottner" ones ! :) > > > > Cheers, > > > Seb > > > > vermeil_IEC_Zener_Diode_Symbol.png > > > 2KViewDownload > > > > 250px-Schottky_diode_symbol.svg.png > > > 2KViewDownload > > > > 140px-Zener_diode_symbol.svg.png > > > < 1KViewDownload > > > -- > > You received this message because you are subscribed to the Google Groups > > "jallib" group. > > To post to this group, send email to [email protected]. > > To unsubscribe from this group, send email to > > [email protected]. > > For more options, visit this group at > >http://groups.google.com/group/jallib?hl=en. -- You received this message because you are subscribed to the Google Groups "jallib" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/jallib?hl=en.
