in the remote control dialog , choose "controllers" , then press the Learn
button , now move a slider on your midi control surface; the edit field
should reflect what was just received.
cheers
Roy.
----- Original Message -----
From: "Peter Torpey" <[email protected]>
To: "'JSonar -- JAWS Scripts for Sonar list'" <[email protected]>
Sent: Monday, July 05, 2010 6:23 AM
Subject: Re: [Jsonar] Using the Envelope tool with Jsonar
Ah, after a bunch of playing around, I finally interpreted what you said
(and the Sonar documentation was trying to describe) correctly and got the
effect I wanted!
I was able to control the amount of effect using automation and the pitch
wheel on my midi keyboard. I couldn't get the effect to be controlled by
any of the sliders on my midi keyboard. when I chose "controller" and the
"learn" mode of sonar, nothing happened. Aren't the sliders considered
controllers?
Well, in any case, I got it to work by using the pitch wheel as the
control
surface.
Thanks again. Your directions were good.
The trouble I keep having with the Sonar documentation is that most
everything is described using the mouse and embedded pictorials of what
you
should be seeing in each dialog. thus, unless you're familiar with the
program already, it is difficult to comprehend what they are trying to
explain.
slowly I'm learning.
--Pete
-----Original Message-----
From: [email protected] [mailto:[email protected]] On
Behalf
Of Mark Faben
Sent: Sunday, July 04, 2010 1:08 PM
To: JSonar -- JAWS Scripts for Sonar list
Subject: Re: [Jsonar] Using the Envelope tool with Jsonar
Hi,
Also no idea here I'm afraid on the envelope tool and there are
probably a good few differnt ways to do the task you want to do,
however, the best option useually is something like the following
(hoping I'm getting it right as I'm not at home or near my Sonar
computer as I'm on hols...):
You'd basically want to do it by using an 'effects send'.
Basically insert an effects send onto the track with the audio you
want to add the selective echo/reverb/delay to, if one isn't alreayd
there.
Then insert the desired effect for the delay/reverb/whatever you want,
on to the Effects bus.
Back on your track of audio, you'll need to activate the send, and
then move the send volume up to determine how much is being sent to
the send.
Of course, this will add the patched effect from the effect send to
the entire audio track; there are really two ways to then make it only
have the effect on the parts of the audio you want it to be on;
Most people seem to go for recording automation on the effects send on
the audio track; basically have the volume of the effects send set to
nothing on the bits you want no efect, and set higher on those bits
you want the effect on (the level obviously altering how much of the
effect is heard).
Another way might be to automate the volume on the effects send bus
itself, whilst having the volume on the audio track's effects send
level, set high enough; basiclaly reduce the volume of the bus on the
parts where you don't want to be hearing the effect...
err I've probably not described that as well as I might have done were
I able to look and make sure I'd got it right on my sonar machine...
but maybe it'll help...
Mark
On 04/07/2010, Peter Torpey <[email protected]> wrote:
Okay, I can turn on the envelope tool with JSonar by hitting "E" when in
the
Track view.
I read all the documentation I could find on envelopes in the Sonar Help
documentation, but couldn't figure out how to actually use the envelope
tool
from the keyboard. When I hit "e" to toggle envelope tool "on", I don't
see
any other useful windows or dialogs pop up.
Can someone point me in the right direction to get started here?
perhaps the envelope tool is not really what I'm looking for here
(although
I'd like to learn to use it from the keyboard for other purposes).
here is the task I am trying to perform. I have some spoken text. I
would
like to add an "echo" or delay effect on certain words of the text (not
the
entire clip). maybe cut and paste and bounce to track is a better way of
doing this?
Anyway, thanks for any suggestions on the task at hand and/or pointers on
how to use the envelope tool from the keyboard.
--Pete
--
Mark Faben
_______________________________________________
Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org.
Jsonar mailing list
[email protected]
http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.830 / Virus Database: 271.1.1/2976 - Release Date: 07/04/10
02:35:00
_______________________________________________
Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org.
Jsonar mailing list
[email protected]
http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
_______________________________________________
Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org.
Jsonar mailing list
[email protected]
http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
