On Thu, Apr 1, 2010 at 09:59, Serge Vautour <[email protected]> wrote: > This is very odd. The "OSPF instance is not running" message makes me wonder > if there's a licensing problem. I haven't been able to find anything on the > Juniper web site...
There should be no issue with licensing - IPv6 has been a standard feature in Junos for quite some time. I don't have any experience with 9.2R2 on an M10i specifically though - I guess it is possible there is a bug... > > Are you able to ping your Cisco router's FF80 address? What do you see if you > run "monitor interface traffic fe-0/1/0" while you run your pings? Do you > have any neighbors picked up by ND (show ipv6 neighbors)? Do you have any > Firewall Filters attached to Loop0 that would block some traffic? Good ideas. Also, is this a production or lab box Ramesh? if it's a lab box you might try restarting rpd - these problems seem to be quite odd indeed (from what I can tell you are configuring things properly). > > HTH, > Serge > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- @ChrisGrundemann weblog.chrisgrundemann.com www.burningwiththebush.com www.coisoc.org _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
