I agree with Chris. Everything looks configured right. Since you can ping, the only problem seems to be with OSPFv3. Anything in the logs? I'd restart RPD as well... Do you have a lab box you can try it on?
Serge ----- Original Message ---- From: Ramesh Karki <[email protected]> To: Chris Grundemann <[email protected]> Cc: [email protected]; Serge Vautour <[email protected]> Sent: Thu, April 1, 2010 2:07:02 PM Subject: Re: [j-nsp] ipv6 routing Hi Serge, Are you able to ping your Cisco router's FF80 address? Yes I can ping both the link local address and the manually assigned address. What do you see if you run "monitor interface traffic fe-0/1/0" while you run your pings? The captured output seems okay (I have tried with tcpdump from shell mode too..) 22:02:36.895648 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: ICMP6, echo request, seq 44, length 16 22:02:36.896282 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, echo reply, seq 44, length 16 22:02:37.895555 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: ICMP6, echo request, seq 45, length 16 22:02:37.896414 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, echo reply, seq 45, length 16 22:02:38.896466 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: ICMP6, echo request, seq 46, length 16 22:02:38.901718 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, echo reply, seq 46, length 16 22:06:06.206997 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, neighbor advertisment, tgt is fe80::20c:31ff:fe95:a400, length 24 22:06:06.529913 In IP fe1-1.beetle.subisu.net.np > OSPF-ALL.MCAST.NET: OSPFv2, Hello, length 60 22:06:06.865791 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, neighbor solicitation, who has fe80::217:cbff:fe77:1f, length 32 22:06:06.865867 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: ICMP6, neighbor advertisment[|icmp6] 22:06:06.866165 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: ICMP6, echo request, seq 6, length 16 22:06:06.866752 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, echo reply, seq 6, length 16 22:06:07.866094 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: ICMP6, echo request, seq 7, length 16 22:06:07.866812 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, echo reply, seq 7, length 16 22:06:08.866000 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: ICMP6, echo request, seq 8, length 16 22:06:08.866736 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: ICMP6, echo reply, seq 8, length 16 Do you have any neighbors picked up by ND (show ipv6 neighbors)? V6 neighbors are discovering : IPv6 Address Linklayer Address State Exp Rtr Interface abcd:3800:1:1::2 00:18:73:46:12:32 stale 797 yes ge-0/0/0.0 abcd:3800:2:1::2 00:0c:31:95:a4:00 stale 345 yes fe-0/1/0.0 fe80::202:17ff:fed8:4c00 00:02:17:d8:4c:00 stale 57 yes ge-0/0/0.0 fe80::20c:31ff:fe95:a400 00:0c:31:95:a4:00 stale 224 yes fe-0/1/0.0 fe80::218:73ff:fe46:1232 00:18:73:46:12:32 stale 152 yes ge-0/0/0.0 Do you have any Firewall Filters attached to Loop0 that would block some traffic? yes, I have applied a firewall filter policy on Lo0 to filter some specific tcp/udp services rest are accepted. I am not sure if it is a Licensing problem, I have not found any related doc on the web too.. Chris, This is my productions box, so I can restart the rpd process only on our regular maintains day. thank you, Ramesh On Thu, Apr 1, 2010 at 10:11 PM, Chris Grundemann <[email protected]>wrote: > On Thu, Apr 1, 2010 at 09:59, Serge Vautour <[email protected]> wrote: > > This is very odd. The "OSPF instance is not running" message makes me > wonder if there's a licensing problem. I haven't been able to find anything > on the Juniper web site... > > There should be no issue with licensing - IPv6 has been a standard > feature in Junos for quite some time. I don't have any experience with > 9.2R2 on an M10i specifically though - I guess it is possible there is > a bug... > > > > > Are you able to ping your Cisco router's FF80 address? What do you see if > you run "monitor interface traffic fe-0/1/0" while you run your pings? Do > you have any neighbors picked up by ND (show ipv6 neighbors)? Do you have > any Firewall Filters attached to Loop0 that would block some traffic? > > Good ideas. > > Also, is this a production or lab box Ramesh? if it's a lab box you > might try restarting rpd - these problems seem to be quite odd indeed > (from what I can tell you are configuring things properly). > > > > > HTH, > > Serge > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > -- > @ChrisGrundemann > weblog.chrisgrundemann.com > www.burningwiththebush.com > www.coisoc.org > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp __________________________________________________________________ Make your browsing faster, safer, and easier with the new Internet Explorer® 8. Optimized for Yahoo! Get it Now for Free! at http://downloads.yahoo.com/ca/internetexplorer/ _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
