No any relevant logs are tracked, even enabling traceoptions I could not able to collect any events. Its sounds like a dead. yes Chris got the right point. I shold have to try restarting RPD. but unfortunately I don't have any extra box for lab.
Thank you, On Thu, Apr 1, 2010 at 11:22 PM, Serge Vautour <[email protected]>wrote: > I agree with Chris. Everything looks configured right. Since you can ping, > the only problem seems to be with OSPFv3. Anything in the logs? I'd restart > RPD as well... Do you have a lab box you can try it on? > > Serge > > > > ----- Original Message ---- > From: Ramesh Karki <[email protected]> > To: Chris Grundemann <[email protected]> > Cc: [email protected]; Serge Vautour <[email protected]> > Sent: Thu, April 1, 2010 2:07:02 PM > Subject: Re: [j-nsp] ipv6 routing > > Hi Serge, > > Are you able to ping your Cisco router's FF80 address? > Yes I can ping both the link local address and the manually assigned > address. > > What do you see if you run "monitor interface traffic fe-0/1/0" while you > run your pings? > > The captured output seems okay (I have tried with tcpdump from shell mode > too..) > > 22:02:36.895648 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: > ICMP6, echo request, seq 44, length 16 > 22:02:36.896282 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, echo reply, seq 44, length 16 > 22:02:37.895555 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: > ICMP6, echo request, seq 45, length 16 > 22:02:37.896414 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, echo reply, seq 45, length 16 > 22:02:38.896466 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: > ICMP6, echo request, seq 46, length 16 > 22:02:38.901718 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, echo reply, seq 46, length 16 > 22:06:06.206997 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, neighbor advertisment, tgt is fe80::20c:31ff:fe95:a400, length 24 > 22:06:06.529913 In IP fe1-1.beetle.subisu.net.np > OSPF-ALL.MCAST.NET: > OSPFv2, Hello, length 60 > 22:06:06.865791 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, neighbor solicitation, who has fe80::217:cbff:fe77:1f, length 32 > 22:06:06.865867 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: > ICMP6, neighbor advertisment[|icmp6] > 22:06:06.866165 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: > ICMP6, echo request, seq 6, length 16 > 22:06:06.866752 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, echo reply, seq 6, length 16 > 22:06:07.866094 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: > ICMP6, echo request, seq 7, length 16 > 22:06:07.866812 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, echo reply, seq 7, length 16 > 22:06:08.866000 Out IP6 fe80::217:cbff:fe77:1f > fe80::20c:31ff:fe95:a400: > ICMP6, echo request, seq 8, length 16 > 22:06:08.866736 In IP6 fe80::20c:31ff:fe95:a400 > fe80::217:cbff:fe77:1f: > ICMP6, echo reply, seq 8, length 16 > > Do you have any neighbors picked up by ND (show ipv6 neighbors)? > > V6 neighbors are discovering : > > IPv6 Address Linklayer Address State Exp Rtr > Interface > abcd:3800:1:1::2 00:18:73:46:12:32 stale 797 yes > ge-0/0/0.0 > abcd:3800:2:1::2 00:0c:31:95:a4:00 stale 345 yes > fe-0/1/0.0 > fe80::202:17ff:fed8:4c00 00:02:17:d8:4c:00 stale 57 yes > ge-0/0/0.0 > fe80::20c:31ff:fe95:a400 00:0c:31:95:a4:00 stale 224 yes > fe-0/1/0.0 > fe80::218:73ff:fe46:1232 00:18:73:46:12:32 stale 152 yes > ge-0/0/0.0 > > Do you have any Firewall Filters attached to Loop0 that would block some > traffic? > yes, I have applied a firewall filter policy on Lo0 to filter some specific > tcp/udp services rest are accepted. > > > I am not sure if it is a Licensing problem, I have not found any related > doc > on the web too.. > > Chris, > This is my productions box, so I can restart the rpd process only on our > regular maintains day. > > thank you, > > Ramesh > On Thu, Apr 1, 2010 at 10:11 PM, Chris Grundemann <[email protected] > >wrote: > > > On Thu, Apr 1, 2010 at 09:59, Serge Vautour <[email protected]> > wrote: > > > This is very odd. The "OSPF instance is not running" message makes me > > wonder if there's a licensing problem. I haven't been able to find > anything > > on the Juniper web site... > > > > There should be no issue with licensing - IPv6 has been a standard > > feature in Junos for quite some time. I don't have any experience with > > 9.2R2 on an M10i specifically though - I guess it is possible there is > > a bug... > > > > > > > > Are you able to ping your Cisco router's FF80 address? What do you see > if > > you run "monitor interface traffic fe-0/1/0" while you run your pings? Do > > you have any neighbors picked up by ND (show ipv6 neighbors)? Do you have > > any Firewall Filters attached to Loop0 that would block some traffic? > > > > Good ideas. > > > > Also, is this a production or lab box Ramesh? if it's a lab box you > > might try restarting rpd - these problems seem to be quite odd indeed > > (from what I can tell you are configuring things properly). > > > > > > > > HTH, > > > Serge > > > _______________________________________________ > > > juniper-nsp mailing list [email protected] > > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > > > > > -- > > @ChrisGrundemann > > weblog.chrisgrundemann.com > > www.burningwiththebush.com > > www.coisoc.org > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > > __________________________________________________________________ > Make your browsing faster, safer, and easier with the new Internet > Explorer® 8. Optimized for Yahoo! Get it Now for Free! at > http://downloads.yahoo.com/ca/internetexplorer/ > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
