Hi, Is your ospf config similar for both IPv4 and IPv6? Do we need to configure similarly on both v4 and v6 ! some interfaces that are announced on v4 ospf are not announced on v6 ospf. I tried both (v4 and v6) with similar area-id and different area-id, but couldn’t succeed, rest are similar.
whatever routing protocol (static/ospf) of ipv6 routing is completely paralyzed in m10i,its sucking me. Thank you, On Thu, Apr 1, 2010 at 4:59 PM, Antonio Querubin <[email protected]> wrote: > On Thu, 1 Apr 2010, Ramesh Karki wrote: > > Similar ospf config between cisco to cisco is okay there is not any issue. >> But between cisco to M10i is not working. >> Here, I have listed my JunOS ospf config : >> run show configuration protocols ospf3 >> preference 10; >> area 0.0.0.10 { >> interface lo0.0 { >> passive; >> } >> interface ge-0/0/0.0 { >> metric 10; >> >> am I missing anything ?? >> >> My curiosity : when I execute the command > run show ospf3 interface >> ge-0/0/0.0 it says - >> “OSPF instance is not running” ?? >> > > Is your ospf config similar for both IPv4 and IPv6? Does 'show ospf > interface' give you the same thing? > > > Antonio Querubin > 808-545-5282 x3003 > e-mail/xmpp: [email protected] > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
