On Sun, 4 Apr 2010, Ramesh Karki wrote:
As I have already mentioned, the same interface fe-0/1/0 has been configured
to run both ospf and ospf3 and there is no any issue on ospf v4 from the
beginning.
show ospf interface fe-0/1/0.0
Interface State Area DR ID BDR ID
Nbrs
fe-0/1/0.0 BDR 0.0.0.10 x.x.192.4 x.x.192.1 1
but the same interface configured for ospf3 outcome is unexpected.
show ospf3 interface fe-0/1/0.0
OSPF instance is not running
Reviewing what you've posted so far I only see a partial ospf3 config for
ge-0/0/0.0
Could you please post the complete output of:
show configuration protocols ospf
show configuration protocols ospf3
show ospf interface
show ospf3 interface
Then for your dual-stack interfaces which should be running ospf and ospf3
do:
show configuration interfaces
On your ciscos which have a working ospf3 config do
show running-config | begin ipv6 router ospf
show ipv6 ospf interface
show running-config interface <each dual-stack interface that faces a juniper>
Antonio Querubin
808-545-5282 x3003
e-mail/xmpp: [email protected]
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
