I see that one of the library files is for a ti-stellaris, but I can't
see that component in my Kicad eeschema viewer.
It seems like a link is missing somewhere. Or maybe I just don't know
how to view components..
Bob G
On 01/11/2015 10:34 PM, Bob Gustafson wrote:
See below
On 01/11/2015 06:40 PM, Adam Wolf wrote:
Yeah, that isn't really what you need to do.
I am not sure the state of your system.
What is the results of
find /Library/Application Support/kicad
in a terminal?
Lots of stuff - 6214 files - pcb's, wings, ...
if it's mostly empty, then just add
make install
to your list of makes above, and that sould copy the libraries to
/Library/Application Support/kicad/libraries
and you should be good.
I am not sure what happens when you install all those fp-libs... you
probably just want to install the github or kicad one, depending on
if you want to run online or copy all the github stuff to your system.
Adam Wolf
On Sun, Jan 11, 2015 at 6:25 PM, Bob Gustafson <[email protected]
<mailto:[email protected]>> wrote:
Hi Adam
I downloaded the kicad-library-master folder and stuck it into
~/KiCad, then went into it and did:
cmake . # Note dot
Then did:
make help
This gave a bunch of make targets
Then did:
make install/strip
make install_pretty_fp-lib-table
make install_github_fp-lib-table
make install_legacy_fp-lib-table
Then fired up kicad -> eeschema
and looked around for some components that looked 'new' - didn't
see anything outstanding.
Probably placed things in the wrong place?
The KiCad/kicad-library-master folder is 661M size.
Bob G
On 01/11/2015 04:05 PM, Adam Wolf wrote:
Hi Bob,
The symbols and help are in a different repository. Right now,
there isn't a good way to incorporate them into the bundling
process.
My OSX builder does it out of cmake. I don't really like that,
but it was the fastest way to results.
I do not think my patch for OS X search paths was accepted yet
(but I don't remember), so you might have to manually apply that
patch even if you copy help files to the right location.
The files are in the kicad-library repository. It's on github,
at https://github.com/KiCad/kicad-library.
If you check that out, and do a cmake of the libraries, and copy
the library output to /Library/Application
Support/kicad/library, libraries should show up.
This is a bit of a mess on OS X, to say the least. We know, and
we're working on it :)
In my osx builder, it creates a kicad-extras dmg that contains
the checked out github footprints, for folks who don't have a
net connection always (or don't like using the ones on github).
FWIW, here's an image of the current output of my osx builder:
https://www.dropbox.com/s/qeexd3eppfssuzi/Screen%20Shot%202015-01-02%20at%202.21.29%20PM.png?dl=0
Adam Wolf
Cofounder and Engineer
W&L
On Jan 11, 2015 2:57 PM, "Bob Gustafson" <[email protected]
<mailto:[email protected]>> wrote:
I think the info below describes my ‘most up-to-date’ OS X
build. Some of the config parameters were changed by the
CMakeCache.txt script and I don’t know if they are
appropriate (the USE_WX_GRAPHICS_CONTEXT=OFF in particular.
If anyone knows better, please post.
Application: kicad
Version: (2015-01-10 BZR 5363)-product Debug build
wxWidgets: Version 3.0.2 (debug,UTF-8,compiler with C++ ABI
1002,GCC 4.2.1,STL containers,compatible with 2.8)
Platform: Mac OS X (Darwin 14.0.0 x86_64), 64 bit, Little
endian, wxMac
Boost version: 1.57.0
USE_WX_GRAPHICS_CONTEXT=OFF
USE_WX_OVERLAY=ON
KICAD_SCRIPTING=ON
KICAD_SCRIPTING_MODULES=ON
KICAD_SCRIPTING_WXPYTHON=ON
USE_FP_LIB_TABLE=HARD_CODED_ON
BUILD_GITHUB_PLUGIN=ON
The above information came from kicad->Help->Copy Version
Information, but this information is copied to the clipboard
only after the little dialog box is closed. If you can see
the dialog box, then the information on the clipboard is
stale. Maybe this should be changed - just to align
expectations.
wxPython 3.0.2.0 was prebuilt, boost 1.57.0 was prebuilt,
and avhttp was built (when?)
———
Under Help, the KiCad Manual is not available nor is the
Getting Started in KiCad.
When I click on the eeSchema icon, I get the half finished
schematic I have been working on - at least these things
didn’t go away. The part libraries are not new.
Perhaps there is something else I can do to get the help
files active and better component descriptions available?
There was something about getting these from the repos, but
no actual addresses.
———————
There are a lot of warnings when I compile - mostly about
overlaid template and incompatible types, differing argument
counts on function def and call.
A representative bunch are shown below.
/Users/bobgus/KiCad/wx-bin/include/wx-3.0/wx/osx/toplevel.h:64:18:
note: hidden
overloaded virtual function
'wxTopLevelWindowMac::IsActive' declared here:
different qualifiers (none vs const)
virtual bool IsActive();
/Users/bobgus/KiCad/kicad/include/class_board_item.h:126:18:
note: hidden
overloaded virtual function 'BOARD_ITEM::SetLayer'
declared here:
different number of parameters (1 vs 2)
virtual void SetLayer( LAYER_ID aLayer )
^
/Users/bobgus/KiCad/wx-bin/include/wx-3.0/wx/docview.h:351:46:
note: while
substituting deduced template arguments into function
template 'operator&'
[with geometry_type_1 = long, geometry_type_2 =
<anonymous enum at
/Users/bobgus/KiCad/wx-bin/include/wx-3.0/wx/docview.h:54:1>]
bool IsVisible() const { return (m_flags &
wxTEMPLATE_VISIBLE) != 0; }
^
/Users/bobgus/KiCad/wx-bin/include/wx-3.0/wx/docview.h:54:1:
note: unnamed type
used in template argument was declared here
enum
^
/usr/local/include/boost/polygon/polygon_set_traits.hpp:45:69:
warning:
template argument uses unnamed type
[-Wunnamed-type-template-args]
typedef typename is_polygonal_concept<typename
geometry_concept<T>::type...
^
/usr/local/include/boost/polygon/polygon_set_concept.hpp:21:86:
note: in
instantiation of template class
'boost::polygon::is_polygon_set_type<<anonymous enum at
/Users/bobgus/KiCad/wx-bin/include/wx-3.0/wx/docview.h:54:1>
>' requested
here
...gtl_or<typename is_polygon_45_or_90_set_type<T>::type,
typename is_polyg...
FWIW
Bob G
^
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
Post to : [email protected]
<mailto:[email protected]>
Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
Post to : [email protected]
<mailto:[email protected]>
Unsubscribe : https://launchpad.net/~kicad-developers
<https://launchpad.net/%7Ekicad-developers>
More help : https://help.launchpad.net/ListHelp
_______________________________________________
Mailing list: https://launchpad.net/~kicad-developers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~kicad-developers
More help : https://help.launchpad.net/ListHelp
