I have not found an easy way to do that. Andy
On Fri, 20 Mar 2009 12:16:45 -0000 "evlotus7" <[email protected]> wrote: > Hi, > > Is it possible to draw less then a 1/4 of a circle. like 1/8 or 1/16? > > Thanks > > Bruno > > --- In [email protected], Andy Eskelson <andyya...@...> wrote: > > > > On Fri, 20 Mar 2009 04:57:52 -0000 > > "Daniel CORRE" <daniel-co...@...> wrote: > > The drawing tools are a bit crude and awkward, but it is possible once > > you get the hang of them. > > > > You use the arc tool. > > The arc tool draws 1/4 of a circle, so you use several arcs. > > You always start at the centre of the circle, so. > > > > Select the arc tool. > > > > (assume 4 grid points is the size) > > > > Click in the centre of the circle that > > the arcs will lie on. > > > > Move up 4 points. click to end > > > > click back on centre > > Move left 4 points click to end > > > > Click back on centre > > move down 4 points click to end. > > > > You should have your 270 degree arc now. > > > > You can move the position of the arc about by varyong the direction you > > pull the radius out, takes a bit of practice. Stick with the up down left > > and right until you get the hang of it. > > > > Hope this helps. > > > > Andy > > > > > > > > > > > > > > > How is it possible to draw a 270 ° arc of circle in a module design ? > > > I've put a open office 3 file to better explain my problem in the folder > > > called daniel's problem. > > > > > > Thanks to everyone who can help me. > > > > > > Regards, > > > Daniel > > > > > > > > > > > > ------------------------------------ > > > > > > Please read the Kicad FAQ in the group files section before posting your > > > question. > > > Please post your bug reports here. They will be picked up by the creator > > > of Kicad. > > > Please visit http://www.kicadlib.org for details of how to contribute > > > your symbols/modules to the kicad library. > > > For building Kicad from source and other development questions visit the > > > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! > > > Groups Links > > > > > > > > > > > > > > > > ------------------------------------ > > Please read the Kicad FAQ in the group files section before posting your > question. > Please post your bug reports here. They will be picked up by the creator of > Kicad. > Please visit http://www.kicadlib.org for details of how to contribute your > symbols/modules to the kicad library. > For building Kicad from source and other development questions visit the > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > Links > > >
