HI If you are using the latest version of Kicad then Just draw a small arc using the arc tool and the double click on it then a window opens enter the arc angle value as 2700 and give ok
Regards, Sandeep On Fri, 20 Mar 2009 Andy Eskelson wrote : >On Fri, 20 Mar 2009 04:57:52 -0000 >"Daniel CORRE" <[email protected]> wrote: >The drawing tools are a bit crude and awkward, but it is possible once >you get the hang of them. > >You use the arc tool. >The arc tool draws 1/4 of a circle, so you use several arcs. >You always start at the centre of the circle, so. > >Select the arc tool. > >(assume 4 grid points is the size) > >Click in the centre of the circle that >the arcs will lie on. > >Move up 4 points. click to end > >click back on centre >Move left 4 points click to end > >Click back on centre >move down 4 points click to end. > >You should have your 270 degree arc now. > >You can move the position of the arc about by varyong the direction you >pull the radius out, takes a bit of practice. Stick with the up down left >and right until you get the hang of it. > >Hope this helps. > >Andy > > > > > > > > How is it possible to draw a 270 ° arc of circle in a module design ? > > I've put a open office 3 file to better explain my problem in the folder > > called daniel's problem. > > > > Thanks to everyone who can help me. > > > > Regards, > > Daniel > > > > > > > > ------------------------------------ > > > > Please read the Kicad FAQ in the group files section before posting your > > question. > > Please post your bug reports here. They will be picked up by the creator of > > Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute your > > symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > > Links > > > > > >
