Hi everyone, Perhaps did you see the drawing of the module called LED-5mm. There is a single 270° arc of circle. You can try to edit it and see what I am talking about. I don't know how it has been made, but it has been made !!! And I would like to know how !
Best regards, Daniel --- In [email protected], Andy Eskelson <andyya...@...> wrote: > > On Fri, 20 Mar 2009 04:57:52 -0000 > "Daniel CORRE" <daniel-co...@...> wrote: > The drawing tools are a bit crude and awkward, but it is possible once > you get the hang of them. > > You use the arc tool. > The arc tool draws 1/4 of a circle, so you use several arcs. > You always start at the centre of the circle, so. > > Select the arc tool. > > (assume 4 grid points is the size) > > Click in the centre of the circle that > the arcs will lie on. > > Move up 4 points. click to end > > click back on centre > Move left 4 points click to end > > Click back on centre > move down 4 points click to end. > > You should have your 270 degree arc now. > > You can move the position of the arc about by varyong the direction you > pull the radius out, takes a bit of practice. Stick with the up down left > and right until you get the hang of it. > > Hope this helps. > > Andy > > > > > > > > How is it possible to draw a 270 ° arc of circle in a module design ? > > I've put a open office 3 file to better explain my problem in the folder > > called daniel's problem. > > > > Thanks to everyone who can help me. > > > > Regards, > > Daniel > > > > > > > > ------------------------------------ > > > > Please read the Kicad FAQ in the group files section before posting your > > question. > > Please post your bug reports here. They will be picked up by the creator of > > Kicad. > > Please visit http://www.kicadlib.org for details of how to contribute your > > symbols/modules to the kicad library. > > For building Kicad from source and other development questions visit the > > kicad-devel group at http://groups.yahoo.com/group/kicad-develYahoo! Groups > > Links > > > > > > >
