At 04:32 AM 6/28/2008, Wendy Davies wrote:
Hi All
Have any of you please got any advice on how to get my fans looking curved. I
have tried most things from different tension to rearranging the passives but
no luck. Mine are looking too flat instead of rounded, sometimes they work (
but I keep forgetting what I have done to get it right) but I have more flat
than round.
thanks
Wendy St Dogmaels
1. Always pull the passive pair outward (away from the footside)
when working the worker pair through the passive.
After the worker pair has gone through the passive, tension the
worker and arrange the passive where you want it to be.
2. Put a pin under the passive pair to keep it where you want it to be.
Analysis:
Getting a rounded fan requires that the passive pairs be slightly
longer than would be achieved with normal tensioning. The extra
length allows the passives to curve.
Patty
-
To unsubscribe send email to [EMAIL PROTECTED] containing the line:
unsubscribe lace [EMAIL PROTECTED] For help, write to
[EMAIL PROTECTED]
