Ray Gwinn said: > I have Wisp-Dist running on a Soekris 4521. I wish to bridge the two > pcmcia cards, but I > cannot seem to get it working on layer 2. Layer 3 bridging seems to work
Are both wireless running in master mode? Layer 2 bridging does not work on wireless cards in managed mode. > okay. The > ethernet ports are not included in the bridge. > > I have assigned the same ip address to br0, netsc0, and netsc1. I have > enabled br0 to Have you assigned the netcs0 and netcs1 to be used in the bridge? Also adding the ip address to the wireless interfaces does nothing when you are assigning them to the bridge just the bridge ip is important. > start at boot. I have tried layer 2 bridging both with and without layer > 3 bridging enabled. Bad Bad Bad just choose one > Again, layer 3 bridging (only) seems to work okay > > Can anyone tell me the secret of layer 2 bridging? > > If anyone has a similar setup working, could you post your > /etc/network/if.config file? Jim TerWee ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
