Please send the output of ip addr iwconfig brctl show br0
Ray Gwinn wrote:
I have Wisp-Dist running on a Soekris 4521. I wish to bridge the two pcmcia cards, but I cannot seem to get it working on layer 2. Layer 3 bridging seems to work okay. The ethernet ports are not included in the bridge.
I have assigned the same ip address to br0, netsc0, and netsc1. I have enabled br0 to start at boot. I have tried layer 2 bridging both with and without layer 3 bridging enabled. Again, layer 3 bridging (only) seems to work okay
Can anyone tell me the secret of layer 2 bridging?
If anyone has a similar setup working, could you post your /etc/network/if.config file?
Ray
------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
-- Best Regards, Vladimir Ivashchenko ThunderWorx - www.thunderworx.com Senior Systems Designer/Engineer
------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
