This info is what is displayed on a Windows XP system attempting a wireless internet connection via the Wisp-Dist AP. The windows XP client can connect okay using layer 3 bridging.
There is only one AP involved, and it is Wisp-Dist. I wish to use two sector antennas, that is the reason for two radios. Is it correct to set both radios to the same frequency, or should something like channels 1 and 6 be used? Ray On 19 Feb 2004 at 21:16, Vladimir Ivaschenko wrote: > > I'm confused. So the other WDS party is not WISP-Dist? > > Ray Gwinn wrote: > > More info about my layer 2 testing: > > > > On the wireless client, the collecting displays: > > > > Waiting to associate > > Renewing IP address > > Verifying Connection > > > > At this point an error is displayed as follows: > > > > Boingo was unable to connect to -------- > > > > It seems as though there is some sort of routing problem that causes the > > connection to fail. The dhcp relay part seems to complete (it works with > > layer 3 bridging). > > > > Another thing I find strange. When configured for layer 3 bridging, I must > > also enable NAT. All devices on the Soekris 4521 are on the same subnet > > (10.0.0.0/16) so I would not think NAT would be required. > > > > Ray > > > > > > > > > -- > Best Regards, > Vladimir Ivashchenko > ThunderWorx - www.thunderworx.com > Senior Systems Designer/Engineer ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ leaf-wisp-dist mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-wisp-dist
