Date: Thu, 15 Mar 2001 20:14:05 -0800
From: "Marc @ American Elevator" <[EMAIL PROTECTED]>
Subject: Re: 128MB for Libretto 110, is there a way?
These instructions would make a great skit on Saturday Night Live...
----- Original Message -----
From: Paul Chan
To: Libretto
Sent: Thursday, March 15, 2001 6:02 PM
Subject: Re: 128MB for Libretto 110, is there a way?
Date: Fri, 16 Mar 2001 09:53:57 +0800
From: "Paul Chan" <[EMAIL PROTECTED]>
Subject: Re: 128MB for Libretto 110, is there a way?
Hi,
I don't know I have a solution for Libertto 50/70 Memory. I will tried =
later. Eventually this solution is for IBM PC110 to increase the memory. =
The Ram chip was the same used in Libretto 50/70, so I think it will be =
a possible apply to Libretto. Because the data bus of the memory is the =
same. The following is the information from a Japanese site.=20
The 8MB it increases to the ADTEC make 16MB addition MEMORY.=20
Importance:=20
When the cover is opened, it is outside the guarantee object of Japan =
IBM. In addition, looking at this page, the result of remodelling, =
causing the operational malfunction, and the like responsibility it does =
not come off. We ask on self responsibility.=20
To do , as for idea that you propose suddenly...=20
The turtle turtle doing in ADTEC make 16MB memory of the treasure, the =
rear 8MB increasing =E3=81=A1 =E3=82=83 obtaining you call=20
How, to be fearful there is no =E5=8B=BF body even in world, the wound =
it was the idea which probably will be put out... " (/> <)/=20
Acknowledging the fact that this is released pleasantly and you =
appreciate .=20
The addition memory of of the corresponding type obscurity which from =
now on becomes sacrifice (the ^_^; By the way the tip/chip is " NEC =
D42S17800LG5-A70 ".=20
When it peels. Method of peeling inhaling and taking and the solder =
inhaling the excessive solder with the line and after taking, inserting =
the =E3=83=9E=E3=83=81 needle between the tip/chip and the foot it =
applies the =E3=82=B3=E3=83=86, the foot is floated is repetition.=20
It does not make your death wasteful... (- the person -)=20
And just 2 on the photograph among 4 when the turtle turtle it does. =
The tip/chip which was riding the 16MB baseplate is the " HITACHI =
51W17800LTT6 ".=20
The Samsung KM48V2100C perhaps the equal item (the ^^; Data seat GET! It =
does.=20
It is difficult to see, however is, when you saw that from side (with =
respect to the photograph right)=20
Also 4 finishing doing, the turtle turtle the RAS (the 7pin) when it =
connects. It meaning that between of memory and memory is narrow, =
whether the one which it solders from the tip/chip of photograph left =
side is good, the =E3=81=97=E3=82=8C=E3=81=BE=E3=81=9B=E3=82=93. When =
you attach from the right side, the pin of the RAS which has been =
floated did with the disturbance and the =E3=81=A5 and others applied =
is. And as for being the shape where the line of the RAS is unnatural =
because direction of memory installation 180 degrees you =
misunderstood...=20
The photograph the middle you take the forgetting =E3=81=A1 =E3=82=83 =
=E3=81=A3 it is (the ^_^; HKDRT=20
After ending job, the whole. After closing the cover, it is completion. =
When... with you thought, the cover just a little came with thickness of =
memory and is attached the =E3=81=A3 =E3=81=A1 =E3=82=83 was (the ^_^; =
However) it closes temporarily, don't you think?.=20
If it does again to start here, being to think, the 28MB (the built-in =
4MB+ addition 24MB) with it starts, it does, but... it was recognized =
the how 32MB. Somehow, the BIOS memory being able to judge just? Being =
we would like to see, are the DARK2301 (the niftyc:fmpc/LIB/05/13) =
using, when you look at setting, the place of 02,03 being recognized =
with the DBDC, it increases. This doing again to set with the CBCC, when =
it restarts... this time moving with the 28MB, =E3=82=8B circumstances. =
It drew up still, being to be, the =E3=81=A3 temporary already just a =
little embezzling, you look at circumstances.=20
00/07/12 postscript=20
After all being recognition strangely to be and to be, it drew up the =
program. Contents do when 03 is DC, the simple thing =E3=81=A3 that the =
CB, the =E3=81=A6 which is changed into CC reboots 02,03.=20
Also does this program appears and it is to start and, someone addition =
24MB memory challenge? 24MB 2 set... we help with 16MB memory + 8MB =
memory or the 16MB memory x3, therefore (the ^. the ^) / the extent, =
helping it does not seek the compensation. However success as for =
guarantee however it is not possible. (It has not failed until now, is, =
because of sense (the ^-^; M guarantee asks at the place of the =
necessity training (the _'_) m=20
How, you try writing small, because... even there is no meaning which =
trades, it puts out also the fact that many stands it makes very much =
(the ^-^; Temporarily 1 name kana?=20
It is memory count when starting. The 28288MB being indicated, it =
increases. In regard to present experience to be indicated with the =
on-board memory quantity being -384KB, temporarily correctly so is, (the =
^_^;=20
When 00/09/04 postscript above-mentioned programs are used, built-in =
memory the thing clarification where recognition of the memory which =
with the turtle turtle is made the 8MB becomes strange (the _ _; Direct =
if it is not. If =E3=81=BE =E3=81=81 cCf is not shared, there is no =
problem, it is is, but...=20
The tip/chip which has the result (guarantee is not possible, (the ^_^; =
NEC D42S17800LG5-A70 =20
HITACHI 51W17800LTT6 =20
Samsung KM48V2100BS-L6 =20
Importance:=20
When the cover is opened, it is outside the guarantee object of Japan =
IBM. In addition, looking at this page, the result of remodelling, =
causing the operational malfunction, and the like responsibility it does =
not come off. We ask on self responsibility.=20
However it is not, the person who would like to try using the PC110 of =
the 28MB to do, executing servicing it increases the self-confidence of =
soldering.=20
-------------------------------------------------------------------------=
-------
I have transaled in English. If anyone who have EE knowledge, I can =
share my experence with you because I have sucessful to convert a IBM =
PC110 to a 32 MB Ram machine from 16MB.=20
Regards,
Paul
----- Original Message -----=20
From: "neil barnes" <[EMAIL PROTECTED]>
To: "Libretto" <[EMAIL PROTECTED]>
Sent: Thursday, March 15, 2001 5:52 PM
Subject: H Re: 128MB for Libretto 110, is there a way?
> Date: Thu, 15 Mar 2001 09:46:22
> From: "neil barnes" <[EMAIL PROTECTED]>
> Subject: H Re: 128MB for Libretto 110, is there a way?
>=20
> Answer obvious - Tosh listened to Comrade Bill and decided that no-one =
would=20
> ever need more than 640k memory. As 64M was the smallest they could =
get,=20
> they put that in :)
>=20
> Neil
>=20
>=20
> >From: Magician Reply-To: Libretto To: Libretto Subject: Re: 128MB for =
> >Libretto 110, is there a way? Date: Wed, 14 Mar 2001 17:52:23 -0800
> >
> >Date: Thu, 15 Mar 2001 10:44:55 +0900 From: Magician Subject: Re: =
128MB for=20
> >Libretto 110, is there a way?
> >
> >Paul,
> >
> >I can pull out of a hat a Libretto with 96 MB of RAM, but it will =
also=20
> >shrink in size. Magic tricks often cause this side effect. Now we =
return=20
> >from the realm of Magic to the wisdom of Toshiba.
> >
> >After Libretto 70, Toshiba made Libretto M3 (Mobile pack III) for NTT =
> >DoCoMo wireless division, with 32 + 64 MB RAM. That was the same size =
as=20
> >Libretto 20 through 70. After that Toshiba increased the size and =
decreased=20
> >RAM to the maximum of 64 MB in Libretto 100 and 110. Logic not =
understood.
> >
> >You can find out more following the links from here:=20
> >http://auctionaddict.com/cgi-bin/single.cgi?ID=3DHAAOHTJ1
> >
> >Oh, I forgot, it also has the magic Japanese alphabet on the keycaps.
> >
> >The Magician -------- Original Message -------- Subject: 128MB for =
Libretto=20
> >110, is there a way? Date: Wed, 14 Mar 2001 09:29:09 -0800 From: =
"Paul"=20
> >Reply-To: Libretto To: Libretto
> >
> >Date: Wed, 14 Mar 2001 14:21:30 -0300 From: "Paul" Subject: 128MB for =
> >Libretto 110, is there a way?
> >
> >Hi everyone! Is there a magician who can tell me the way (if there's =
a way)=20
> >to put 128MB of RAM in my Libretto 110CT? Thanks Paul.
> >
> >
> >
> >
> >**************************************************************=20
> >http://libretto.basiclink.com - Libretto mailing list=20
> >http://libretto.basiclink.com/archive - Archives=20
> >http://www.picante.com/~gtaylor/portable/faq.html - FAQ=20
> >-------UNSUBSCRIBE-------=20
> >mailto:[EMAIL PROTECTED]?subject=3Dcmd:unsubscribe =
--------UNSUBSCRIBE=20
> >DIGEST------ Use above but add DIGEST to the subject line...=20
> >**************************************************************
> >
> =
_________________________________________________________________________=
> Get Your Private, Free E-mail from MSN Hotmail at =
http://www.hotmail.com.
>=20
>=20
>=20
>=20
> **************************************************************
> http://libretto.basiclink.com - Libretto mailing list =20
> http://libretto.basiclink.com/archive - Archives
> http://www.picante.com/~gtaylor/portable/faq.html - FAQ =20
> -------UNSUBSCRIBE------- =20
> mailto:[EMAIL PROTECTED]?subject=3Dcmd:unsubscribe=20
> --------UNSUBSCRIBE DIGEST------
> Use above but add DIGEST to the subject line... =
=20
> **************************************************************
>=20
>=20
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************
**************************************************************
http://libretto.basiclink.com - Libretto mailing list
http://libretto.basiclink.com/archive - Archives
http://www.picante.com/~gtaylor/portable/faq.html - FAQ
-------UNSUBSCRIBE-------
mailto:[EMAIL PROTECTED]?subject=cmd:unsubscribe
--------UNSUBSCRIBE DIGEST------
Use above but add DIGEST to the subject line...
**************************************************************