Date: Fri, 25 Jan 2002 19:18:15 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] 20 gig Fujitsu in an overclocked L50 and working!
>Date: Sat, 26 Jan 2002 00:26:48 +0800 >From: Raymond <[EMAIL PROTECTED]> > >Right I just opened up the libby and pulled out the motherboard to get at >those 1mm spacers that are under that black plastic sheet I was going to ask people about this. I ended up just loosening the case screws, and pulling the two halves slightly apart. Then the drive slide in pretty well. Has anyone experienced any problems in doing this... other than forgetting and just yanking it back out without loosening the screws? >OK I've just booted EZ-Drive, the filename of the full thing was "WD >ezdrive 909W 906bios", when it was making the boot disk it said 906 but >I've just run it in the Libby and it syas 9.09W ... *shrug* ... > >Hmm ... it finds the Fujitsu MHN2200AT which has to be a good sign given >I've overclocked this libby from 75 to 100MHz using that single pin cut >method, looks like at this stage this hard drive doesn't have the same >problem as the IBMs have with overclocked libbys ... > >OK this is interesting, it recons I need a boot disk for Win95 *shrug* good >thing my Tecra is running the right version ... > >Right ... for some strange reason EZ-Drive says you either create FAT32 or >FAT16 partitions but it doesn't give you the option of creating the first >partition as FAT16 then the rest as you want (I want to boot Win98, NT and >Redhat on this thing) ... you also can't leave free space which is annoying >... I might just do a single 20 gig FAT32 then use FDISK later ... > >Oh good its finished ... now to use fdisk to partition around that >hibernation boundary. > >Bleh ... give up on that idea, I really dun wanna reinstall the OS ... I'll >just do the usual 2 gig first partition (so both Win95 and WinNT will >recognise it), image the old hard drive onto the new one so I'll have a >laptop to use then figure out the rest later. > >Of coures, at times like this you remember little things ... like the need >to back up the OLD hard drive ... *sigh* OK put the old hard drive back in, >clip on the docking bar, plug in the floppy disk drive, fire up the old >Tecra 500 (my aging laptop which I keep around because its actually got a >decent docking station) and run a parallel port ghost session ... this will >be a long night ... now where did I put that ghost boot disk? > >... > >Stuff that, make a new boot disk and get a new copy of ghost off my >archives. This isn't a good start ... boot the libby, start ghost master, >boot the Tecra into Win95, start ghost as slave, ghost partition, so far so >good ... I'll go watch 'The Great Escape' whilst I wait (ya its that really >old movie but its the best thing showing on free-to-air at the moment and I >don't watch TV enough to get cable). > >... > >OK commercial break ... and WHAT THE HECK? I don't recall putting the libby >into automatic standby ... *sigh* turn the libby back on and let it resume >... oh thats nice, Norton Ghost actually knows how to resume the ghost >session through the parallel port even when one computer goes into standby! >OK thats one good thing I guess ... > >... > >Right ... second commercial break and what happens? The Tecra decides to go >to sleep and kill the ghost session ... *sigh* OK reboot BOTH computers but >this time both run in pure DOS mode. Restart the ghost session and check >back at the next commercial break .... > >... > >Aha! I know why the thing suspended last time ... I come to the libby and >its flashing dual orange indicators (the MANUAL recons its a power problem >but I know from past experience that this is a thermal shutdown). OK sit >the libby on its end (PCMCIA slot up), floppy drive on top as a roof, box >fan sitting on my chair cooling the thing down, resume and oh goody, Ghost >knows how to resume again. Lets see ... > >... > >Ah ... still going ... > >... > >Yay! Finished ghosting. OK now shut it all down (which is harder than you >think ... in pure DOS just hitting the power button actually hibernates the >libby which you DON'T want as when I put the big hard drive back in, it >won't bother reading the EZ-Bios stuff). Gotta pull the power and the >battery pack ... OK now put the new hard drive back in and fire the whole >lot up ... whee! IT works! OK make sure EZ-Bios boots, right now boot off >the floppy .... yes thats the way ... OK start the libby as ghost master >and Tecra as ghost slave, stand the whole lot on end, turn on the box fan >and lets go! > >... > >OK movie finished and lo and behold so has the libby! ... OK unclip all the >junk thats hanging off the libby and lets power it up ... ooh nice, it all >works! Damn it feels so good to go from 770 meg to 2 gig (its the first >partition). And nice that FDISK under Win95 actually SEES the whole drive >(unlike when I was using a boot disk). Now to make some partitions. God >FDISK takes ages to check disks ... > >... > >right made another 2 gig partition for NT ... and this really annoys me, I >can't specify a cylinder to start and end at to avoid that blasted >hibernation area! ... oh well even 2 gig is enough for me for today, its >past midnight and I'll worry about that hibernation thing tomorrow ... >night all, more tales to come! > > >I'm still wondering why I wrote all this but since its already written I >might as well send it and not have wasted it ... if you made it to the end >of this you have WAY too much time on your hands ;-) Ooooopppss.... that must be me ;-P I was looking for the question and it never came... but I've exercising my speed reading! Matt _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
