Date: Sat, 26 Jan 2002 03:34:05 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] 20 gig Fujitsu in an overclocked L50 and working!
>Date: Fri, 25 Jan 2002 12:06:20 -0800 (PST) >From: David Chien <[EMAIL PROTECTED]> > > > > Has anyone experienced any problems in doing this... other than >forgetting > > and just yanking it back out without loosening the screws? > > Some users of L50/70s have had motherboard failures afterwards sticking >in 9.5mm HDs due to the thickness warping it and the RAM chip area that's >right above it. > > Solution? Pray, remove spacers, or just keep it loose. Okay... that's enough of an incentive to go in an do surgery before the heat in there thinks it might want to play havoc... But I read where, and I forget from the last time I had the whole MB out, that you have to pull off the heat sink to get to mounting screws. And as with most of my stuff... my heat sink grease is in CA. I just hate springing another buck for something I already have. :-) Matt _________________________________________________________________ Join the world�s largest e-mail service with MSN Hotmail. http://www.hotmail.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
