Date: Sat, 26 Jan 2002 03:47:47 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] 20 gig Fujitsu in an overclocked L50 and working!
>Date: Sat, 26 Jan 2002 01:21:41 >From: "neil barnes" <[EMAIL PROTECTED]> > > >>Date: Fri, 25 Jan 2002 14:56:33 -0500 >>From: Jonathan Towne <[EMAIL PROTECTED]> >>Subject: Re: [LIB] 20 gig Fujitsu in an overclocked L50 and working! >> >>On Fri, Jan 25, 2002 at 11:22:04AM -0800, Matthew Hanson scribbled: >># I was going to ask people about this. I ended up just loosening the >>case >># screws, and pulling the two halves slightly apart. Then the drive slide >>in >># pretty well. >># >># Has anyone experienced any problems in doing this... other than >>forgetting >># and just yanking it back out without loosening the screws? >> >>Not yet.. :/ >> >>I've done the same thing with a Toshiba 6gig, running great so far, screws >>loosened up once and i had to spin them back in, so watch out for that, >>but otherwise, no problems. >> >>- Jonathan Towne > >*Run*, do not walk, to a tool-kit and remove those spacers. It's a lot >easier to do that now than to try and resolder the memory chips in a few >months. Repair prognosis in that case is *not* good :( > >You're trying to fit a 9.5mm chunk of metal in an 8.5mm hole. The disk >doesn't squash. The case doesn't bend. The only bit left to move is the >motherboard... > >Neil Eeeeeeeekkkkk.... And I've been running this for three days now... where's the closest Radio Shack!!? _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
