Date: Fri, 25 Jan 2002 12:06:20 -0800 (PST) From: David Chien <[EMAIL PROTECTED]> Subject: Re: [LIB] 20 gig Fujitsu in an overclocked L50 and working!
> >those 1mm spacers that are under that black plastic sheet > > I was going to ask people about this. I ended up just loosening the case > screws, and pulling the two halves slightly apart. Then the drive slide in > pretty well. > > Has anyone experienced any problems in doing this... other than forgetting > and just yanking it back out without loosening the screws? Some users of L50/70s have had motherboard failures afterwards sticking in 9.5mm HDs due to the thickness warping it and the RAM chip area that's right above it. Solution? Pray, remove spacers, or just keep it loose. ===== adorable toshiba libretto The latest news and information for the Toshiba Libretto owner. http://www.silverace.com/libretto/ __________________________________________________ Do You Yahoo!? Great stuff seeking new owners in Yahoo! Auctions! http://auctions.yahoo.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
