Date: Sat, 26 Jan 2002 03:26:56 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: Re: [LIB] 20 gig Fujitsu in an overclocked L50 and working!
>Date: Fri, 25 Jan 2002 14:56:33 -0500 >From: Jonathan Towne <[EMAIL PROTECTED]> >Subject: Re: [LIB] 20 gig Fujitsu in an overclocked L50 and working! > >On Fri, Jan 25, 2002 at 11:22:04AM -0800, Matthew Hanson scribbled: ># I was going to ask people about this. I ended up just loosening the case ># screws, and pulling the two halves slightly apart. Then the drive slide >in # pretty well. ># ># Has anyone experienced any problems in doing this... other than >forgetting # and just yanking it back out without loosening the screws? > >Not yet.. :/ > >I've done the same thing with a Toshiba 6gig, running great so far, screws >loosened up once and i had to spin them back in, so watch out for that, but >otherwise, no problems. > >- Jonathan Towne Hecks... better ratchet up those torque wrench foot-pounds! ;-P _________________________________________________________________ Join the world’s largest e-mail service with MSN Hotmail. http://www.hotmail.com ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
