Date: Fri, 01 Mar 2002 06:33:35 +0000 From: "Matthew Hanson" <[EMAIL PROTECTED]> Subject: DOS C&S drivers for HP M820E
David, Have you taken these files offline? I was going to try setting them up on my L70 with this HP M820E I picked up. Mayy ------------------- 1) Set the SCSI card included with these two CD-RW drives to 16-bit. 2) Here's the only thing you'll need under the L100/L110. http://160.87.24.214/hpm820e2.zip (103KB) Everything needed to get the CD-RW to run under DOS on a Libretto L100/L110. Simply put all files on your HD (okay in root directory or in a folder). Finally, look at the included config.sys and autoexec.bat files and put them into your own config.sys and autoexec.bat files, adjusting paths to the included files as needed. -- 3) Other optional files if you're interested in tweaking them to get other devices to work on other models. http://160.87.24.214/hpm820e1.zip (330KB) Install disk for the HP M820E & Ricoh MP8040SE CD-RW drives only. =Does not= include PCMCIA card & socket drivers, needed by the Librettos. http://160.87.24.214/cardwizard.zip (15MB!) A couple handfuls of CardWizard and CardSoft versions just in case you happen to need them for more tweaking under DOS, Windows 3.1x, NT, etc. http://160.87.24.214/cardsoft.zip (61KB) The only files you'll need to enable the PCMCIA slot for these CD-RWs (and probably all other PCMCIA devices) under DOS on the L100/L110. See included config.sys for the three changes to config.sys you need to make to make it work on the L100/L110. (That's just: device=c:\hpm820e\ss365sl.exe device=c:\hpm820e\cs.exe device=c:\hpm820e\csalloc.exe Modify paths as needed to point to where you have these files on your HD.) d =) _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.; ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
