Date: Mon, 04 Mar 2002 08:44:01 +0000 From: T i m <[EMAIL PROTECTED]> Subject: Re: [LIB] Won't reeboot .. drive just clicks. Coldboots ok though?
Hi Guys, [T] No, *I* haven't opened the Libby in any way yet and as some have kindly noted, still has the std 810M drive in there (as far as I know). The seller told me that the Libby was bought by his Co as a 'Demo' machine and had only seen around 50hrs of use. Apart from one pixel out it looks pretty perfect to me and no signs of ever being opened (screw damage, case damage around the join and the battery seems to have a pretty good life). The disk access fault only seemed (past tense) to appear when doing a 'warm boot' but has never appeared after a straight switch on or power cycle? My bigger problem now is I can't run my Mapping prog Mapsource? It just comes up with a .. MAPSOURCE caused an invalid page fault in module MAPSOURCE.EXE at 0137:0063200e. Registers: EAX=00000000 CS=0137 EIP=0063200e EFLGS=00010246 EBX=7802a4bf SS=013f ESP=00aafc6c EBP=00000000 ECX=00000009 DS=013f ESI=00000000 FS=0c77 EDX=00aafc80 ES=013f EDI=00aafd3c GS=0000 Bytes at CS:EIP: f3 a5 52 ff 15 f0 0a 76 00 83 c4 08 3b c5 75 22 Stack dump: 00aafc80 815920bc 007f37e0 00aafe38 00000000 e1bab8ab 00aafcfc 00000000 00000000 00000000 0000001f 0000000b 00000059 00000021 00801713 00000000 Means nothing to me! I completely removed OSR2, reinstalled and exactly the same result!? I'm in the process of sticking 98SE on the libby .. (longshot) .. Cheers guys .. T i m Pres Waterman wrote: > Date: Sun, 03 Mar 2002 22:00:02 -0500 > From: Pres Waterman <[EMAIL PROTECTED]> > Subject: Re: [LIB] Won't reeboot .. drive just clicks. Coldboots ok though? > > > > > So, trying to sort some loose ends (PCMCIA Card n Socket etc) I needed > > to reboot. When I do this, after POST and memory test I hear the HDD > > click like it's moving the read arm but no spin and eventual "Insert > > system disk". > > > > Switch off / on and all is fine? > > > > Any clues please? > > You are NOT going to believe this, but... > > Have YOU put in a 9.5mm HDD into a L50? > > Because specifically the symptom I have noticed is... HDD spins, RAM test > OK, nothing, nothing, nothing, "insert system disk"... > > And it starts intermittent and quickly goes to permanent. > > Thanks > > Pres Waterman, W2PW > c/o 112 Motors, LLC > Long Island Ford, Kia and Used Dealer > > GO BILLS! > > ************************************************************** > http://libretto.basiclink.com - Libretto mailing list > http://libretto.basiclink.com/archive - Archives > http://www.picante.com/~gtaylor/portable/faq.html - FAQ > -------TO UNSUBSCRIBE------- > Reply to any of the list messages. The reply mail should be > addressed to: [EMAIL PROTECTED] - Then replace any text > on the message's subject line: cmd:unsubscribe > --------TO UNSUBSCRIBE DIGEST------ > Do above but with this on subject line: cmd:unsubscribe digest > ************************************************************** ************************************************************** http://libretto.basiclink.com - Libretto mailing list http://libretto.basiclink.com/archive - Archives http://www.picante.com/~gtaylor/portable/faq.html - FAQ -------TO UNSUBSCRIBE------- Reply to any of the list messages. The reply mail should be addressed to: [EMAIL PROTECTED] - Then replace any text on the message's subject line: cmd:unsubscribe --------TO UNSUBSCRIBE DIGEST------ Do above but with this on subject line: cmd:unsubscribe digest **************************************************************
