On Thursday, 01/09/2003 at 01:37 CST, James Melin <[EMAIL PROTECTED]> wrote: > > in OSA SF port 0 is set for physical LPAR #4, port 1 is set for physical > LPAR #5. Relative device addresses 0 and 1 are set for port 0, relative > device addresses 2 and 3 are set for port 1. > > the ENTR card is on chpid 34, devices 830-83f > > This configuration SHOULD mean that physical LPAR #4 (Linux LPAR 1) sees > devices 830,831 and 83F, and that physical LPAR #5 sees devices 832,833 and > 83F (83F being the management device/port address) > > What seems to be happening is this: > > No mater what I tell SuSE netconfig, (option two for OSA Ethernet, etc) > including manually specifying device 832 as the even # device and telling > the software to use port 1 (Asks for port, I enter a numeric '1') it pulls > the same mac address as the ethernet interface on LPAR 1, using 830 and > 83F.
I know this is grasping at straws, but perhaps you need to specify port 0? Maybe microcode is changing logical vs. physical port # binding? I.e. you can get at both ports, but logical port 0 will be assigned to physical port 1 in LPAR 5? Alan Altmark Sr. Software Engineer IBM z/VM Development
