On Thu, 9 Jan 2003, James Melin wrote: > I am getting something similar for RH 7.2 attempting to use eth0
In another post, you said this is an ENTR OSA. Give the following a try, as your OSA will use the LCS driver (not QETH) which means you should not have to modify the RH installation initrd. > First question of relevance: > > Please enter the network device you intend to use (e.g. ctc0, escon0, > iucv0,eth0,hsi0,tr0) > > >---- my reply: eth0 Should be correct. > Second question where the thing seems to go to hell: > > Please enter parameters you need to pass to the channel device layer > this includes I/O ports of your ctc, escon, qeth, hsi and lcs devices > Additional parameters for QETH devices such as port name should be > entered at the next prompt, not here > (e.g. "ctc0,0x600,0x601" will activate the ctc0 interface at I/O ports > 0x600,0x601) > > >---- my reply: eth0,0x832,0x833 Try "lcs0,0x832,0x833" and see what happens. I can't guarantee, however, that you won't get the same weirdness with the logical/physical port numbering that you're experiencing with SuSE 7.2... HTH -- Cheers, Vic Cross
