It sounds like you have checked all the right things but is the DEVICE defined as
shared in addition to the CHPID?
>>> [EMAIL PROTECTED] 08/24/04 08:16AM >>>
thanks for the tip. i don't think this is a problem since i know device
400 is the real device 400 since i can ask for a specific drive and get
the correct one.
Robin Murray
Tel: (902) 453-7300 x4177
Cell: (902) 430-0637
Richard Pinion <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
08/23/2004 04:39 PM
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: Re: ipling initial linux tape
I know this may be a long shot but it did happen to me several years ago.
I had two 3490 c22's numbered 100 and 101. For several months we just
mounted tapes according to what the tape displays idicated without really
cross checking what the console was saying. One day I was attempting to
IPL SAE on th test LPAR. These were escon 3490's shared between the two
LPAR's. Anyway I kept issuing the IPL from device 100 command from the
HMC. The 3490 drive said mount tape xxxxxx which I did but nothing
happened. Did this many many times before I realized that the tape mount
message was actually coming out on device 101 and not 100. The escon
cables were crossed!
Chances are this isn't your problem but you never know!
>>> [EMAIL PROTECTED] 08/23/04 03:31PM >>>
no, this is the kernal i downloaded from marist. i don't think this is a
linux problem, i don't think it's even getting to linux. but i thought
perhaps someone else has run across this...
Robin Murray
Tel: (902) 453-7300 x4177
Cell: (902) 430-0637
"Post, Mark K" <[EMAIL PROTECTED]>
Sent by: Linux on 390 Port <[EMAIL PROTECTED]>
08/23/2004 04:27 PM
Please respond to Linux on 390 Port
To: [EMAIL PROTECTED]
cc:
Subject: Re: ipling initial linux tape
Is this by any chance a Red Hat distribution? If so, look at
http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=121788 Apparently Red
Hat will be putting out an updated s390utils package soon.
Mark Post
-----Original Message-----
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On Behalf Of
Robin
Murray
Sent: Monday, August 23, 2004 3:22 PM
To: [EMAIL PROTECTED]
Subject: ipling initial linux tape
i'm running an mp3000 with three lpars defined, and am trying to ipl linux
from the intall tape for the first time. when i ipl the tape (a 3490), all
i
get is a load failure, saying "control unit or device is busy". i've tried
varying off the drives/paths/chpid from all the other lpars and ipling
again, but i get the same thing. anyone else run into this?
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
