Hi, Are you booting from SAN? Can you send your IPL statment?
Also add the output of the following command: CP Q V Offer baruch On Sep 21, 2013 5:53 AM, "David Armenta" <[email protected]> wrote: > Hello, > > <newbie> > > I have plenty of experience with linux, but not z/VM. With that said one > of my linux guest ran out of space on my san volume, i freed up enough so > linux would be happy, but when i go to ipl the guest i get this error msg : > > > 00: HCPLDI2816I Acquiring the machine loader from the processor controller. > 00: HCPLDI2817I Load completed from the processor controller. > 00: HCPLDI2817I Now starting the machine loader. > 01: HCPGSP2630I The virtual machine is placed in CP mode due to a SIGP > stop and store status from CPU 00. > 02: HCPGSP2630I The virtual machine is placed in CP mode due to a SIGP > stop and store status from CPU 00. > 00: MLOEVL012I: Machine loader up and running (version v2.4.3). > 00: MLOLOA009E: Error while reading Boot Record. > 00: MLOLOA041E: Unable to find the component table pointer. > 00: MLOEVL010E: IPL failed. > > > any idea on how to go about this ? any assistance would be greatly > appreciated. > Thanks all. > > -- > David A > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ > ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
