Thanks Mark, I am coming to that conclusion my self as well. The WWPN and Lun are correct, I just verified. I am a little confused on the proper way of attaching the FCP device to another running guest. from my reading / research I found the vmcp command, am i on the right track ? or can you or some explain how to properly do the attaching to another linux guest ?
Thanks again everyone, This is great help David A On Sep 21, 2013, at 9:43 AM, Mark Post <[email protected]> wrote: >>>> On 9/21/2013 at 03:54 AM, David Armenta <[email protected]> >>>> wrote: >> Hi Offer and Michael >> >> yes, I am booting from SAN >> IPL 1808 >> >> last time successfully IPL'd 2 months ago. >> >> here is the print outs : >> CP Q V >> 00: STORAGE = 20G >> 00: XSTORE = none >> 00: CPU 00 ID FF01CA4728188000 (BASE) IFL CPUAFF ON >> 00: CPU 01 ID FF01CA4728188000 STOPPED IFL CPUAFF ON >> 00: CPU 02 ID FF01CA4728188000 STOPPED IFL CPUAFF ON >> 00: No AP Crypto Domains are available >> 00: CONS 0009 ON LDEV L0006 TERM STOP HOST TCPIP FROM 10.128.146.71 >> 00: 0009 CL T NOCONT NOHOLD COPY 001 READY FORM STANDARD >> 00: 0009 TO RXCOMP2 PRT DIST RXCOMP2 FLASHC 000 DEST OFF >> 00: 0009 FLASH CHAR MDFY 0 FCB LPP OFF >> 00: 0009 3215 NOEOF CLOSED NOKEEP NOMSG NONAME >> 00: 0009 SUBCHANNEL = 0003 >> 00: RDR 000C CL * NOCONT NOHOLD EOF READY >> 00: 000C 2540 CLOSED NOKEEP NORESCAN SUBCHANNEL = 0002 >> 00: DASD 0101 9336 (VDSK) R/W 1048576 BLK ON DASD VDSK SUBCHANNEL = 000A >> 00: DASD 0190 9336 VM1RES R/O 308160 BLK ON DASD E000 SUBCHANNEL = 0004 >> 00: DASD 0191 9336 VM1U01 R/O 120000 BLK ON DASD E006 SUBCHANNEL = 0006 >> 00: DASD 019E 9336 VM1RES R/O 720000 BLK ON DASD E000 SUBCHANNEL = 0005 >> 00: OSA 0300 ON NIC 0300 UNIT 000 SUBCHANNEL = 0007 >> 00: 0300 DEVTYPE OSA VIRTUAL CHPID 01 OSD >> 00: 0300 MAC 02-00-00-00-00-91 CURRENT >> 00: 0300 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE >> 00: OSA 0301 ON NIC 0300 UNIT 001 SUBCHANNEL = 0008 >> 00: 0301 DEVTYPE OSA VIRTUAL CHPID 01 OSD >> 00: 0301 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE >> 00: OSA 0302 ON NIC 0300 UNIT 002 SUBCHANNEL = 0009 >> 00: 0302 DEVTYPE OSA VIRTUAL CHPID 01 OSD >> 00: 0302 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE >> 00: FCP 1808 ON FCP 1808 CHPID 18 SUBCHANNEL = 0000 >> 00: 1808 DEVTYPE FCP VIRTUAL CHPID 18 FCP REAL CHPID 18 >> 00: 1808 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE >> 00: WWPN C05076E501000020 >> 00: FCP 6008 ON FCP 6008 CHPID 60 SUBCHANNEL = 0001 >> 00: 6008 DEVTYPE FCP VIRTUAL CHPID 60 FCP REAL CHPID 60 >> 00: 6008 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE >> 00: WWPN C05076E501000620 >> Ready; T=0.01/0.01 00:47:20 >> >> ------------------------------------------------------------------------------------------------------------- >> >> Q FCP >> 00: FCP 1808 ON FCP 1808 CHPID 18 SUBCHANNEL = 0000 >> 00: 1808 DEVTYPE FCP VIRTUAL CHPID 18 FCP REAL CHPID 18 >> 00: 1808 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE >> 00: WWPN C05076E501000020 >> 00: FCP 6008 ON FCP 6008 CHPID 60 SUBCHANNEL = 0001 >> 00: 6008 DEVTYPE FCP VIRTUAL CHPID 60 FCP REAL CHPID 60 >> 00: 6008 QDIO-ELIGIBLE QIOASSIST-ELIGIBLE >> 00: WWPN C05076E501000620 >> Ready; T=0.01/0.01 00:50:01 >> >> --------------------------------------------------------------------------------------------------------------- >> >> >> Q LOADDEV >> PORTNAME 50050768 02158D17 LUN 00000000 00000000 BOOTPROG 0 >> BR_LBA 00000000 00000000 >> Ready; T=0.01/0.01 00:50:49 > > It sounds like either the IPL text got over-written on the SCSI disk, or the > WWPN and LUN you're specifying are incorrect. > > If the WWPN and LUN are correct, then to debug, I would log off the guest, > ATTACH one of the FCP devices to a different, already running, guest, and see > if the IPL text is there or not. And perhaps try to re-run zipl against it. > > > Mark Post > > ---------------------------------------------------------------------- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to [email protected] with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > ---------------------------------------------------------------------- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ ---------------------------------------------------------------------- For LINUX-390 subscribe / signoff / archive access instructions, send email to [email protected] with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 ---------------------------------------------------------------------- For more information on Linux on System z, visit http://wiki.linuxvm.org/
