On Sep 21, 2013, at 11:12 AM, Mark Post <[email protected]> wrote:
>>>> On 9/21/2013 at 02:02 PM, David Armenta <[email protected]>
>>>> wrote:
>> I followed your instructions and got the following :
>> mylinux:~ # vmcp att 1c04 to mylinux
>> FCP 1C04 ATTACHED TO mylinux 1C04
>>
>>
>> Then I brought it online :
>> chccwdev -e 1c04
>> Setting device 0.0.1c04 online Done
>
> Wasn't the real device number you were working with 1008? If so, then
> attaching this FCP adapter isn't likely going to give you access to the same
> WWPN/LUN pair.
Yes, but since the 1008 (actucally 1808) is a prod box, I am
using another guest as a test.
>
>> my next step i believe is configure it and LUN to access it correct ?
>> if so, please advice on how to do this.
>
> Now you have to tell us what distribution and version of it that you're
> running. Or, we can do it the "hard" way and start echoing things into /sys.
I am running Sles11 sp2.
>
>
> Mark Post
>
> ----------------------------------------------------------------------
> For LINUX-390 subscribe / signoff / archive access instructions,
> send email to [email protected] with the message: INFO LINUX-390 or visit
> http://www.marist.edu/htbin/wlvindex?LINUX-390
> ----------------------------------------------------------------------
> For more information on Linux on System z, visit
> http://wiki.linuxvm.org/
----------------------------------------------------------------------
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [email protected] with the message: INFO LINUX-390 or visit
http://www.marist.edu/htbin/wlvindex?LINUX-390
----------------------------------------------------------------------
For more information on Linux on System z, visit
http://wiki.linuxvm.org/
