On Sat, 24 Apr 1999, Robin Gilks wrote:
>
> ----- Original Message -----
> From: Jorge Matias <[EMAIL PROTECTED]>
> To: Riley Williams <[EMAIL PROTECTED]>
> Cc: Linux-Ham Mailing List <[EMAIL PROTECTED]>
> Sent: 24 April 1999 12:05
> Subject: Re: Need timeouts for TCP/IP??
>
>
> > On Fri, 23 Apr 1999, Riley Williams wrote:
> >
> [snip]
>
> > But the problem is not there. I do a PING with an IP address and still
> > big delays to transmit. I do PING with 5 secs interval. It never sends the
> > Ping every 5 secs. Sometimes it only transmits a block of 3 frames after
> > 15-20secs.
> >
> >
>
> Have you tried using the YAM in full duplex mode (at least pretend it is
> even if it can't actually do full-duplex). Looks like the modem driver
> thinks
> the channel is busy....
Well, I tried in full duplex but it wont start transmiting. Isn't it
supposed to be transmiting permanently?
>
> Having had a long hard look at the driver to use a similar method of
> interfacing to a G4XYW 9k6 modem, I'm at a total loss as to how it
> works in detail - its very simple in principle but it ain't half complicated
> for
> a ham of little brain :-))
For me the YAM driver for Linux has problems to be solved, but I can't
understand that code.
Regards,
Jorge Matias
- -- --- ------------------------------------------------- --- -- -
Computer Science Student at Instituto Superior Tecnico (Lisbon)
A3000/060 32Mb -[Ariadne][MFC III][CV64]- LinuxOS 2.0.36
QRZ: CT2HBZ - E-Mail: [EMAIL PROTECTED]
