I have the same problem with compilation. ax25-utils-2.1.42a.tar.gz
seems to be the latest version at
ftp://ftp.hes.iki.fi/pub/ham/linux/ax25/.
Where can I find a version that will compile with RH6.0?
John
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Tapio Sokura
Sent: Wednesday, 5 January 2000 9:47
To: [EMAIL PROTECTED]
Subject: Re: AX25 and Redhat 6.1
>Over the last couple of weeks I have been trying to get AX25 going on
Redhat
>6.1. I am unable to comple ax25-utils-2.1.42a.tar.gz on the base
system.
I get
You are using a too old version of ax25 utils. The system has changed a
bit
for 2.2 kernels, you should download ax25-apps, ax25-tools libax25 from
ftp://ftp.hes.iki.fi/pub/ham/linux/ax25/ and install them as instructed.
The ax25-howto is a bit outdated on the ax25 installation when you are
using 2.2 kernels.
As for Samba, you should define the interfaces you want Samba to run on
in
your smb.conf (interfaces = ip-addr/mask). If you don't have an
interfaces
line, Samba will listen and broadcast on all network interfaces on your
machine.
You can also probably configure most of the other packages to only use
certain interfaces. I think having an IP address is mandatory for a
network
interface in 2.2 kernel series. Kernel ipchains would probably be the
easiest way to disable all ip traffic on your radio interfaces.
