On Sun, 9 Jan 2000, john Buxton wrote:
> I have the same problem with compilation. ax25-utils-2.1.42a.tar.gz
> seems to be the latest version at
> ftp://ftp.hes.iki.fi/pub/ham/linux/ax25/.
>
> Where can I find a version that will compile with RH6.0?
Nowhere. Please _read_ the message you quoted.
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Tapio Sokura
> Sent: Wednesday, 5 January 2000 9:47
> To: [EMAIL PROTECTED]
> Subject: Re: AX25 and Redhat 6.1
>
>
> >Over the last couple of weeks I have been trying to get AX25 going on
> Redhat
> >6.1. I am unable to comple ax25-utils-2.1.42a.tar.gz on the base
> system.
> I get
>
> You are using a too old version of ax25 utils. The system has changed a
> bit
> for 2.2 kernels, you should download ax25-apps, ax25-tools libax25 from
> ftp://ftp.hes.iki.fi/pub/ham/linux/ax25/ and install them as instructed.
> The ax25-howto is a bit outdated on the ax25 installation when you are
> using 2.2 kernels.
>
> As for Samba, you should define the interfaces you want Samba to run on
> in
> your smb.conf (interfaces = ip-addr/mask). If you don't have an
> interfaces
> line, Samba will listen and broadcast on all network interfaces on your
> machine.
>
> You can also probably configure most of the other packages to only use
> certain interfaces. I think having an IP address is mandatory for a
> network
> interface in 2.2 kernel series. Kernel ipchains would probably be the
> easiest way to disable all ip traffic on your radio interfaces.
>
--
Tomi Manninen Internet: [EMAIL PROTECTED]
OH2BNS AX.25: [EMAIL PROTECTED]
KP20ME04 Amprnet: [EMAIL PROTECTED]
