----- Original Message ----- From: "Niraj Garg" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, June 03, 2003 11:39 AM Subject: [LIH]Display Flickering in RHL 9.0 on Intel 845 GL chipset box
> Dear all. > I have installed the RHL 9.0 on a Wipro Intel 845 box / 128 MB DDR > Ram/ 40 GB HDD Box. > I have selected the default (as detected by the Installer) settings for > display and monitor. The display flickers very much and it is difficult > to work. > > I have tried with changing the display settings, If I selected any other > alternate settings the display is gone altogether. > > I have also tried the same with RHL 7.3 and also by upgrading the > xf86free in RHL 7.3. The result is same. > > Moreover once I log out the display goes altogether and I have to > reboot the machine. > > any pointers in the above direction will be helpful. > > With kind regards > -- > Niraj P Garg > Banas Dairy > Post Box 20 Palanpur > Tel :02742-253381 -85 > Fax : 02742-252723 > email : [EMAIL PROTECTED] > > > > ------------------------------------------------------- > This SF.net email is sponsored by: eBay > Get office equipment for less on eBay! > http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 > _______________________________________________ > linux-india-help mailing list > [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/linux-india-help Does the proble persist in Windows also ? Try manulay entering modline in XF86Config Shah Komal Kiritkumar Linux User Group Godhra ------------------------------------------------------- This SF.net email is sponsored by: eBay Get office equipment for less on eBay! http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5 _______________________________________________ linux-india-help mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/linux-india-help
