In doing more test. Thanks to everyone who has responded. When I do a ifconfig eth0
I notice that the dropped packets is very high. So what it seems to me is that
nothing is getting out of the eth0 port. however the stats on ifconfig eth0 to say
that the card is configured properly and is up and running.
-----Original Message-----
From: Ray Olszewski [SMTP:[EMAIL PROTECTED]]
Sent: Tuesday, January 12, 1999 4:17 PM
To: Michael; [EMAIL PROTECTED]
Subject: Re: More newbie dumb questions
To ping your Win98 host, you definitely do NOT need DNS. Assuming the
hardware is all okay and you have eth0 (the interface to your Ethernet card)
properly configured, you should be able to ping the Win98 host by its IP
number. For a small network, you can put the name-to-number translations in
the file /etc/hosts, which is a descendent of the pre-DNS standard for
address translation.
/etc/hosts needs entries that look something like this:
127.0.0.1 localhost
192.168.1.1 rocky rocket.squirrel.com
192.168.1.2 bullwinkle bullwinkle.moose.com
192.168.1.3 boris boris.badunov.com
192.168.1.4 natasha natasha.fatale.com
that is, an address followed by all legal names for that host. (The
"localhost" entry is a loopback address and is standard.)
If you cannot ping the Win98 box by address, see if the Linux box's Ethernet
interface is configured correctly -- the command "ifconfig" will report the
status of all network interfaces.
At 12:04 PM 1/12/99 -0800, Michael wrote:
>I'm currently trying to teach myself Linux. I have a system up and running
and I'm trying to configure the TCP/IP on it. Do I need to have DNS up and
running. right now all I'm trying to do is ping my Win98 box.
>
>Running 5.2
>SMC NE 2000 compatible card
>486 DX 4-100
>48 meg ram
>
>
------------------------------------"Never tell me the odds!"---
Ray Olszewski -- Han Solo
762 Garland Drive
Palo Alto, CA 94303-3603
650.321.3561 voice 650.322.1209 fax [EMAIL PROTECTED]
----------------------------------------------------------------
