According to Michael: While burning my CPU.
>
> I having a problem getting my modem to get recognized. I'm using a external USR on
>Cau1 IRQ 3. The mouse is on Cau0 and work's just fine. When I go to launch Minocom,
>it doesn't initialize the modem. I've checked /proc/interrupts and /proc/ioports and
>the address show's up in ioports, but there is no interrupt. I just am unable to
>find where to manually set this.
>
O dear, once again your mail editor does NOT line wrap.
As others and possably you will see, the above text is written on one
continuous line which is "375 cols long".
I suggest you start minicom with the -s option and check the configuration
is correct, i belive the default settings are for /dev/ttyS0.
Check also that /dev/modem is linked to /dev/ttyS1 or cua1, both minicom and
/dev/modem should be configured to either cua? or ttyS?.
> HELP......
>
> Michael
>
--
Regards Richard.
[EMAIL PROTECTED]
