OK, then try adding the following line in your /etc/conf.modules:
options bpck-fdc ft_fdc_parport=1
Chris
Steve Hill (Sys Admin) wrote:
>
> On Tue, 12 Jan 1999, Chris Karakas wrote:
>
> > try to use your streamer on the first slot and your printer on the
> > second. From your logs it seems that ftape only tries slot 0 with two
> > different configurations.
>
> Ftape seems to probe on lp0, and the printer replies to the probe (which
> ftpae reports as an unexpected response). It does actually find the
> streamer on lp1, but then says there is no interrupt (the port has IRQ 5)
>
> I don't want to use lp0 since lp0 is a standard port but lp1 is an ECP
> port. The standard port runs way too slow to stream off properly.
>
> - Steve
